Compatibility
The following versions of Sesam applications should be used with this version of GeniE:
·
Wajac V7.1-03 (or later)
·
Splice V7.4-0
(or later)
·
Sestra V10.1 (or later)
·
Xtract V5.1-08 (or later)
·
Nauticus Hull - July 2017
Documentation
Documentation has been updated with the
relevant additions for V7.5.
New features
Structure
·
OTE10270 -
Allow to lock lengths of individual segments along a beam
·
OTE14880 -
Improve Hull Design Tools - Stiffeners Placement
·
OTE15025 -
Improve eccentric modelling
·
OTE15026 –
Manual editing of derived section properties + fillet radius for I/H and
Channel sections
·
OTE15369 -
Corrosion addition property with new option "Stainless steel"
·
OTE15540 -
Updates to Create Ship Hull from Transverse Smooth Curves
·
OTE15541 -
Updates to Create Ship Hull from Transverse Polyline
·
OTE15542 -
Updates to Create Ship Hull from Arbitrary Set of Curves
FEM Import
·
OTE12703 -
Support "Import nodes as joints" option in domain Model importer
·
OTE14327 -
Implement interactive repair of FEM models during import
·
OTE14495 -
Further improve mesh settings applied to concept model on FEM import
·
OTE14485 -
Implement Nastran import in GeniE
SACS Import
·
OTE13393 –
Support Doppler effect for the individual sea states and global effect wake
encounter
·
OTE15030 -
Handle additional code check properties (Lb, Ss, Rs, Cb)
Pile/Soil Analysis
·
OTE15233 -
Pile code checks performed in Splice
·
OTE15562 - Support
earthquake allowable stress modifier factor for pile code check per API
Environment
·
OTE14472 –
Issue an error if the lowest z-value for the current is not zero
Graphics/GUI
·
OTE14509 -
Direct access to display of free edges - for improved model verification
·
OTE14804 - Add
button to turn labels on/off or clear labels, and allow label display to
persist after refresh graphics.
·
OTE14895 -
Minor but important GUI improvements
·
OTE15563 - Add
an option to support second order moment for splice
·
OTE15709 – Label
eccentricities in Mesh views
Scripting
·
OTE12892 -
Retrieve GeniE version by Jscript
·
OTE15148 - Javascript function to write load cases in load combination
and the load factors
·
OTE15228 - More
intuitive scripting command for moving beam end
Geometry (ACIS)
·
OTE14508 -
Create ship hull by skinning approximation of smooth curves and polygons
·
OTE15620 - 2D
grids construction in hull design tools
Data Exchange
·
OTE15028 - GeniE should send the correct results file into Xtract
·
OTE15454 - XML
rule loads to include UDL
Analysis Definition
·
OTE14497 -
SESTRA 10 for linear static analysis in GeniE
Meshing
·
OTE10077 -
Eliminate short mesh edges not caused by short physical edges (automatic or
part of edit mesh)
·
OTE14358 -
Radial quad mesher to permit surrounding topology
·
OTE15075 -
Implement quality checks and interactive FEM repair
·
OTE15415 -
Allow for topside pan-cake structures
·
OTE15637 - Add
option to create mesh using GIORH and GCHAN instead of GIORHR and GCHANR
Frame Code Check
·
OTE15237 -
Extend code check "Stiffener Spacing Cone", "Bending
Coefficient" and "Unbraced Length Top/Bottom Flange" properties
with From Structure option
·
OTE15317 -
Update AISC 9th and 2005 with respect to fillet radius for I (H) and Channel
sections & Derived section properties
·
OTE15345 -
Update Eurocode with respect to fillet radius for I (H) and Channel sections
& Derived section properties
·
OTE15557 -
Update tubular member checks (API, ISO, Norsok) to
use Derived Section Properties
·
OTE15627 – Add
"Consider beam offset" option to CreateMember
functionality
·
OTE15713 –
Joint member recognition on eccentric geometry
Plate Code Check
·
OTE14887 - CSR
BC&OT - Stainless steel shall not be assigned the minimum corrosion
addition
·
OTE15120 -
Divide panel - Further options
Reporting
·
OTE15412 -
Reporting Split the Beam Property table in two separate tables, one for
buckling properties
·
OTE15624 - Make
empty compartments more transparent
·
OTE15712 - Make
pictures larger in report
·
OTE15817 - Add
extra table for reporting modified derived section properties
Bugfixes
Structure
·
OTD11699 -
Error in aisc_v3.kzy section library for some RHS profiles
·
OTD14389 -
Unnamed feature edge created when copy feature edge for multiple times
·
OTD14671 -
Divide beam by plane fails due to: Plane did not intersect beam
·
OTD15031 -
Creating subset from a set doesn't work
·
OTD14115 -
Profile Punch / Cut dialog crashes GeniE
·
OTD14658 -
Remove Hydro properties not working properly
FEM Import
·
OTD14437 -
Option "Import nodes as joints" is lost in FEM importer
·
OTD14471 -
Domain Model importer fails to handle inner segmented beams
·
OTD14590 - [FEM
import] Unable to copy segment error during FEM import
·
OTD14345 -
Importing FEM file gives property DefaultMeshDensity
= 0m
SACS Import
·
OTD13779 - GeniE crashes after importing SACS inp
file
·
OTD14267 -
Incorrect interpretation of End statement in soil end bearing data
Data Exchange
·
OTD12776 - SDNF
export/import unit formatting issue
Environment
·
OTD13918 – Soil
data - Changing value of suz2 was not applied if it was equal to suz1
FEM Repair
·
OTD14174 - Unit
detection on FEM import fails on FEM file with large sets
Performance
·
OTD13974 -
Partial mesher performance at GeniE
7.4 is slower than 7.3 for large ship model
·
OTD14663 - It
takes quite long time to create profile
·
OTD14786 -
Model with around 2000 dynamic sets - Takes 30 minutes to open and for ever to delete dynamic sets
·
OTD14787 - Full
mesh regeneration - Unacceptable performance - Invalidating loads too time
consuming
Graphics/GUI
·
OTD14568 -
Error in figure for Dialog I-Unsymmetrical Section
·
OTD14740 - GeniE hangs after modification of segment length and
"Run All" on frame code check
·
OTD14834 -
Error in joint reinforcement dialog
·
OTD15031 –
Creating subset from a set doesn’t work
Loads
·
OTD11370 - Corrupted
workspace after inserting compartments and saving
·
OTD14811 -
Compartment loads not shown for filled compartments
·
OTD14030 - Bulk
Pressure wrong in GeniE V7.4 together with NH Oct
2016
Meshing
·
OTD10078 -
Unknown error during meshing. Unable to compute position from param
·
OTD10190 - Some
plates fail to mesh, but only from time to time
·
OTD10296 - Huge
load generated in FEM file
·
OTD14103 -
Support curve is not meshed
·
OTD14475 - GeniE "Conditional mesh" crashes, while
"Always regenerate mesh" runs without error
·
OTD14641 -
Error during meshing, Unable to get element, after adding detail box
·
OTD14680 -
Crash during meshing
·
OTD14761 -
Meshing hangs
·
OTD14797 -
Mirroring hole fails
·
OTD14849 -
Crash during meshing, workaround is to import gnx or
use always regenerate
·
OTD14880 - Mesh
option around hole with edge stiffeners not work
·
OTD14980 - Mesh
result is not good when two periodic objects have interaction
·
OTD15010 -
Material and geometry data is missing for element
·
OTD15042 -
Distorted mesh with circular shell intersection
XML & GNX
·
OTD14078 -
Conditions lost after re-opening GeniE when
originally a gnx file was imported
·
OTD14222 - Code
check results are not kept after workspace restore
·
OTD14349 -
Saving DB (GNX) crashes, then GeniE shuts down.
Exporting XML also does not work
·
OTD14698 - Hole
meshing not working after importing two xml models
·
OTD14748 -
Error in post-operation after import a xml model with name prefix
·
OTD14829 -
Opening gnx workspace does not properly import holes
·
OTD14845 - GeniE crash when saved to 50%
·
OTD14859 -
Problem with XML Import in GeniE - prefixing
equipment doesn't work
·
OTD14870 - GeniE run time error when open ship model
·
OTD14958 - No
data from Wajac->Output->Print file persisted
on XML/GNX
·
OTD14902 - When
opening attached GNX file, no warnings should appear
Frame Code Check
·
OTD8250 -
Member capacity models "lost" in creation process
·
OTD11277 - Code
check: Joint check, brace forces Mipb & Mopb changes dependent of local coordinate system of chord
·
OTD14428 - GeniE crash in connection with
undo of updated concept beam from capacity member data
·
OTD14440 -
Wrong corrosion addition for DNV GL rules in capacity model
·
OTD14543 -
Error in Eurocode for class1 and 2 profiles when Uf>1
from axial force contribution.
·
OTD14686 - Error
in EC3 member check for Lsection
·
OTD14720 -
Invalid script command when "Run all" on frame code check where no
active analyses
Plate Code Check
·
OTD7565 -
Wrong/different Uf in redesign compared to browser
after changing active capacity manager and analysis
·
OTD11772 - (CSR
OT) Pressure on stiffener side using PULS for code check, CSR OT
·
OTD12818 -
Different color coding for panels with same value
·
OTD13973 -
Error in dividing panel by plane
·
OTD14031 - Type
and method wrong after divide panel
·
OTD14795 - Correct
material factor k for yield check according to DNV GL
rules
Reporting
·
OTD11828 - No
results reported for L-section hotspot 2 in save report
·
OTD14576 - No
"worstPhaseAngle" js-command
updated when modify report with 'Frame Code Check'
·
OTD14693 - Crash
when checking beam results diagram on General section
SnackPack
·
OTD14269 -
Wrong thickness property conversion in "L beam to Plate" in GeniE Snack Pack
Bugfixes
Guiding geometry
·
OTD14246 Guiding ellipse end points differ from given
ones
Structure
·
OTD14389 Unnamed feature edge created when copy
feature edge multiple times
Loads
·
OTD14030 Bulk Pressure wrong in GeniE V7.4
together with NH Oct 2016
Meshing
·
OTD14103
Support curve not meshed
Plate Code Check
·
OTD11772 CSR Tank - Pressure on stiffener side using
PULS for code check
Enhancements
Structure, Meshing
and Code check.
·
OTE14887 CSR BC&OT - Stainless steel shall not be
assigned the minimum corrosion addition
Bugfixes
Plate Code Check
·
OTD14198
- CSR BC&OT panel code check: Error in reading out element stresses for
divided panels
·
OTD14060
- Yield screening in way of manholes, computed UfTot
is wrong for Harbor conditions
·
OTD13973
- Error in dividing panel by plane
·
OTD13952
- Update panel result is wrong after 'join' and 'divide' operation
·
OTD14105
- Empty warning message shown in divide panel
·
OTD14031
- Type and method wrong after divide panel
Loads
·
OTD13859
- Filled compartment disappears
·
OTD13820
- Changes in global load combinations does not update all affected Analyses SIN
files
XML/GNX
·
OTD14078
- Conditions lost after re-opening GeniE when
originally a gnx file was imported
Graphics
·
OTE15082
- Re-add Save Graphics OBJ format export
Bugfixes
GNX & XML
·
OTD13910 Several GeniE sessions
can be opened for the same GNX workspace at the same time
·
OTD13908 Manually edited Sestra.inp
files disappears during analysis execution (only after GNX export/import)
·
OTD13882 Unable to run HGLA when path to Genie workspace
has a space (or hyphen) in it
Compatibility
·
Wajac V7.0-01 (or later)
·
Splice V7.3-00 (or
later)
·
Sestra V8.8-02 (or later)
·
Xtract V5.0-04 (or later)
·
Nauticus Hull - October 2016
Documentation
·
OTT3304
- User documentation moved to Sphinx format. New functionality in GeniE V7.4 included in the new documentation.
·
OTT3485
- SIN import and complex results, member code check, reporting
·
OTT3514
- Add documentation on "Radial quad mesher"
·
OTT3515
- Updated documentation of "Detail box"
· OTT3524 - Updated GUI for FEM Import
·
OTT3525
- Added Color Code and Labels Toolbar
New features
Analysis definition
·
OTE13124
- Update plate and stiffener properties - Update FEM file directly (no HGLA)
·
OTE13579
- Update HGLA setup dialog with new values
·
OTE13761
- New option to make HGLA produce an L1.FEM file
·
OTE13958
- In Wajac input support new option OPT13 on OPTI
card
·
OTE14344
- Analysis set-up should include option SIN, SIU or SIF result file (SIN is
default)
·
OTE13363
- Hooking up complex result cases created from importing a Result SIN file
Code Check
(General)
·
OTE13123
- Capacity manager - Improve workflow
·
In the Capacity Manager
view, the user should be able to right-click on selected panels/members/joints and
execute code check for these only.
·
"Generate Code
Check Loads" will be automatically executed as part of the "Execute
Code Check" when needed.
·
OTE13195
- Enable Run All option from Capacity folder
Frame Code Check
·
OTE12816
- Code check: AISC 2005, Calculation of Cw for double
symmetric I/H profiles modified
·
OTE13213
- Code check: AISC ASD 9th, implement check of cross section type General and
Bar
·
OTE6019
- Beam code check of complex result cases
Plate Code Check
·
OTE13122
- FE Fatigue check in GeniE (very fine mesh) CSR
BC&OT - Integration with Nauticus Hull
· OTE14004 -
Recognition of variants of cruciform joint models
· OTE14283 - Support
Hatch Corner Radiused Edge fatigue export
·
OTE13865
- Rule update for DNVGL rules - Minimum value of corrosion addition
·
OTE14050
- Run CSR BC&OT and DNVGL rules in parallel with preparing the code check
·
OTE14199
- Join many panels on the context sensitive menu
·
OTE13433
- Merge and divide capacity panels
Data exchange
·
OTE11732
- Export of S#.FEM file together with T#.FEM and
L#.FEM
Environment
·
OTE12050
- [Pile/soil] Pile capacity plot in GeniE
FEM Import
·
OTE13432
- Add auto mesh density when importing FEM (BDF) file
Graphics (HOOPS)
·
OTE13120
- Result presentation - Improvements in labelling and color coding
·
OTE13423
- Color code of Code Check results on structure model
·
OTE13428
- Color coding Equipment Name and Equipment Weight
GUI
·
OTE13361
- Improve dialog for defining complex load
combinations
·
OTE5845
- Implement color coding and labelling of hinges
·
OTE12742
- Wind profile GUI should gray out the reference height field if Extreme or
Extreme API21 is selected
·
OTE13168
- Rotational spring stiffness (support/hinge) should display unit that is used
(radians)
·
OTE13352
- Add "Element Material Yield" color code query for mesh view.
·
OTE13653
- Make color code visible model only the default
·
OTE14350
- Add FEM Load display/hide button
Meshing
·
OTE12240
- Improve meshing around holes
·
OTE13825
- Detail box - improvements
·
OTE13671
- When "divide by box", set advancing front mesher
on surrounding concepts for improved mesh.
·
OTE13324
- Update DetailBox classes (concept, scripting, xml)
to support unsymmetric dimensions
·
OTE13330
- Add GUI support for splitting geometry along detail
box
SACS Import
·
OTE9055
- Add leg extensions below mudline to a separate set
·
OTE13725
- Create spring to ground supports based on ELASTI definition on the SACS input
·
OTE13818
- Modify wishbone with joints at different locations
·
OTE14331
- Add one line with speed = 0 on current profile to make it complete when SACS
CURR lines not including the line for 0 speed
XML & GNX
·
OTE13443
- Change default workspace in Genie to GNX
·
OTE14627
- Fix crash or hang during saving to GNX
Bugfixes
Analysis Definition
·
OTD13347
- Unclear error message when automatic generation of Sestra
input file is switched off and no input file exists
·
OTD12310
- GeniE is not able to write the correct defined
constant marine growth for a beam completely above SWL if Seastate
= calmsea
·
OTD13095
Incorrect parameter T-ZZ.res/D output from GeniE to Gensod when active SpliceV
·
OTD13428
Gensod can't write TZZRES in Splice IV when
TRES/TMAX=1, and TZZRES≠1
Frame Code Check
·
OTD12286
- Code check: AISC ASD 9th, Axial compression and bending, equation (H1-3)
·
OTD12366
- Code check: AISC ASD 9th, T cross section
·
OTD12410
- Code check: AISC 2005; additional bending moment for channel profile caused
by warping effect not correct
·
OTD13403
- Code Check: EC3 - Calculation of interaction factors using Method 1 modified
·
OTD12484
- Wrong assignment of buckling properties with sets
·
OTD12346
- Code check: API WSD 2014 pile check for Storm condition
·
OTD13615
- Code check: AISC 2005, error in L section calculation when using
"Maximum bending moment" option
Plate Code Check
·
OTD12395
- OTE12819 - Delete capacity panels only (and not also plate)
·
OTD12446
- Code check for free edge beam are not executed for partially free-edged
stiffener
·
OTD12769
- Panels aren't updated if changing properties of plate or beam
·
OTD12978
- Yield screening defect - Limit the elements applicable to screening in way of
holes
·
OTD13641
- Code check according to CSR BC&OT and DNV GL
rules - buckling panels with wrong idealization
·
OTD11821
- Yield screening defect - Yield screening of bracket toe
·
OTD12897
- Fatigue detail box cannot be exported for round (bent) type hopper location
·
OTD13188
- Update stiffener type in export to SPBT
·
OTD13318
- CSR BC&OT and DNV GL rules. Yield Check options: Shear stress correction
factor, computed values shown in dialog.
Data Exchange
·
OTD13227
- GeniE: Remove empty lines in T-Z data section in
the Gensod input file
·
OTD
12491 - Scale mass density does not work properly when working with multiple
sets
Environment
·
OTD12291
- Slow performance while (1) importing rule-loads, (2) generating mesh, based
on CSR BC & OT rules
FEM Import
·
OTD13581
- Crash reading FEM file
·
OTD9776
- Crash when presenting results with mesh from imported .SIN
file
Graphics (HOOPS)
·
OTD11050
- Oriented labelling behaves strange when a beam is double-clicked
·
OTD12209
- Reporting: Beams missing when generating report
·
OTD12399
- Display stress in Color coding/labelling in Plate Yield Check: TauXY shows value of SigmaYY
·
OTD13250
- Color palette is not updated for results presentation
·
OTD13395
- Color coding shows different colors for same property value
GUI
·
OTD13099
- Data entered for spacing in Guide Plane dialog does not take effect unless
focus is shifted before clicking OK
·
OTD5228
- Large Database file could not reopen
Loads
·
OTD12357
- Wrong compartment shape and volume
·
OTD13170
- Failed to copy loadcase with Prescribed
Displacement load
Meshing
·
OTD11260
- Part of result missing after switch active analysis
·
OTD12085
- Mesh preview during mesh editing is wrongly previewing elements of hidden
concepts.
·
OTD12559
- Not update spring element after join shim beam but not join segment
·
OTD12595
- Wrong mass for "Footprint-mass" option
·
OTD13163
- Low performance of the conditional meshing, even when "1.1.1 delete
loads" and "1.1.2 Update loads" are not activated, and
"Include load on mesh" is off.
·
OTD13383
- [Mesh Edit] Wrong mesh when imprint node on membrane element
·
OTD11643
- Mass location is shown in the mesh view even though it is not in the current
selection
·
OTD8679
- Crash when meshing model with extremely short edge
·
OTD12393
- Rigid link mirroring will not mesh connected nodes properly
·
OTD13749
- [Mesh Edit] No support node created for mid-node after mesh editing of 2nd
order elements
Reporting
·
OTD13321
- Error when using RMB and “Save Code Check Report” from run in browser
·
OTD13333
- Error in Hull Design Tools report of label thickness
·
OTD13602
- Plate code check report for CSR BC & OT fails to open in MS Word
·
OTD12486
- Report is not created for loadcase with explicit
loads (point load or line created with beam & parameter)
·
OTD5777
- P-stresses presentation is wrong
·
OTD11828
- No results reported for L-section hotspot 2 in save report
SACS Import
·
OTD13110
- SACS importer should give a warning message on cone members not imported
Structure
·
OTD12841
- GeniE crashes if undo beam with flush end
·
OTD13179
- Removing plate with feature edges hangs GeniE
XML & GNX
·
OTD12551
- Export to XML of generated Beam Code Check report is not complete
·
OTD12623
- Slow import of Rule Loads XML
·
OTD13290
- The code check active Capacity Manager and run is not saved in the GNX
workspace
·
OTD13359
- GeniE hangs on XML export, crashes on JS export
after delete Wind Profile
·
OTD13410
- Flange Width Net is lost on DNV GL Rules and CSR BC&OT during GNX/XML
exchange
Compatibility
In order to use the DNV GL rules (Jan 2016) or
CSR BC & OT (Common Structural Rules for
Bulk Carriers and Oil Tankers, IACS, January
2015. Effective of July 2015) code check for panels,
then the Nauticus
Hull release of March 2016 is required.
In order to use the CSR Tank (Common Structural
Rules for Double Hull Oil Tankers, IACS,
July 2008) code check for panels (including
PULS), then the Nauticus Hull release of March 2016
is recommended. As a minimum Nauticus Hull 2014 - Patch 2 is required.
Documentation
User Manual - Vol 1
·
OTT2930 - Updated chapter
3.17 Create Mass Models: Added the explanation on “Vertical beams and masses”
·
OTT2944 - Updated
chapter 3.8.2 Tubular Joint Modelling:
Added:
Note that by default, joints are visible, but the joint selection button is not
active. You must click the joint selection button to be able to manipulate
joints.
·
OTT2945 - Updated
chapter 3.6.10 Beam Eccentricities: Added a paragraph explaining Joined Offset.
·
Updated chapter 3.1.13
Making a Report
·
Added chapter 3.13 Load
Annotations
·
Updated chapter 3.1.17
Show Length and Angle
·
Added chapter 3.9.8
Converting Point and Line Load to Point Masses
·
Added chapter 3.13.5.3
Exclude loads from the mesh
·
Updated chapter 4.4.1:
Added info about the GeniE RCLite
License
·
Updated chapter 3.1.17:
Added description of the new label button: Angle between mesh
·
Added chapter 2.16 -
Hull Girder Load Adjuster (HGLA)
· Updated chapter
3.9.8 Converting point and line load to point masses
Added note: The user should notice that when loads to mass is enabled, then no
loads will be written to the FEM file for the corresponding loadcase.
Therefore, the user should always ensure that the basic loadcase
with the highest FEM number is a self weight case or
a loadcase which is NOT converted to mass. Otherwise,
the Sestra analysis may fail.
User Manual - Vol 2
·
OTT3083 -Updated
chapter 5.2.3 Air: Added description of Wind Force Calculation Approach.
· OTT2946 - Updated chapter 5.2.3 -
Air: Added ABS wind profile
· Updated chapter 3.6.9 Linear Pilehead Springs: Updated linearised
spring screendump.
User Manual - Vol 3
·
Updated chapter 10.6 -
Import SACS file
·
OTT2930 - Updated
chapter 4.6.3.2: New screendump and added explanation
of vertical beams and masses - with a reference to the existing explanation in
Vol 3.
·
OTT3108 - Updated
chapter 10.4.1 - FEM import: Basic tab - Removed the limitation text.
·
OTD12185 - Updated
chapter 6.2.1.5 Corrosion addition: Updated table
·
Added chapter 7.22 -
Remove Orphan Elements
User Manual - Vol 5
·
Updated chapter 5
Split new code check for DNV GL rules out
from CSR BC&OT, but kept all info in the same chapter.
·
Updated section
5.10 Added feature for Yield strength assessment of
beams/flanges/dummy-rods.
· Added Chapter 7.
Fatigue detail
export.
Reference
Documents
· Updated frame code check reference documents:
o Codecheck implementation of API WSD 2002
& 2005
o Codecheck implementation of API WSD 2014
o Codecheck implementation of AISC 335-89
(9th)
o Codecheck implementation of AISC 360-10
o Codecheck implementation of NORSOK 2013
o Codecheck implementation of EUROCODE
o Codecheck implementation of ISO
· Updated: Sacs to Sesam
Guiding
Documents
·
Added: Soil
Utility Tool
·
Updated: SACS-import
guidelines
· Updated: Pile Soil Modelling
·
OTD11794
Minor typo in the Section parameters and consistent units
document
·
OTD11342
Missing documentation of new license features in licencing
doc
Added : Preview of new user documentation
for GeniE (beta)
New features
Analysis definition
·
OTE12383
GeniE: Support ABS wind profile in Wave load
run
·
OTE12449 [ALM1893] Run HGLA from GeniE
Analysis definition
·
OTE12887
SoilUtilityTool integrated into GeniE.
·
OTE12079 [Pile/soil] Implement support for calculation
of peak skin friction and tip resistance API1993
Splice revision V mode from GeniE
CodeCheck - Frames
·
OTE10117
Code check: EC3, member
classification improvement
·
OTE11977
Include torsion warping effect to the non-tubular section code check
·
OTE12540
Implement member suboption for 'Warping effect' and
add to GUI for non-tubular section code check
·
OTE12289
Code check: API WSD joint check, improve print of 'Lc'
and 'rfac' for double skin grouted joint
·
OTE12532
Update members (GUI included)
Code Check - Plates
·
OTE12329 [ALM1697] New code check for DNV GL rules
·
OTE12333 [ALM1623] Yield strength assessment of flanges
·
OTE12508 [ALM456] Partial update of panels
·
OTE12660
Performance is unnecessarily slow when running code checks
·
OTE12819 [ALM456] Delete panels
·
OTE12861 [ALM869] FE fatigue check in GeniE (very fine mesh)
Loads
·
OTE11830
GeniE: add an option to use Velocity Component
Approach in area wind force calculation
·
OTE12344
Implement the Velocity Component Approach method for area wind force
calculations
FEM Import
·
OTE11771
Domain Model framework supporting Loads
o OTE12527
Add support for TDLOAD card, including name washing, in Domain Model
framework
o OTE12373
Add concentrated line load (eccentric case) to Domain Model
framework
o OTE12374
Add distributed line load to Domain Model framework
o OTE12454
Add gravity load to Domain Model framework
o OTE12335
Add concentrated line load (centric case) to Domain Model
framework
o OTE12341
Add scripting support for Load import On/Off in Domain
Model importer
o OTE12293
Add point load to Domain Model framework
o OTE12257
Add LoadCase to Domain Model
framework
o OTE12275 [Domain model import] Implement FEM import with
general transformation and/or name prefix.
Geometry
·
OTE12542
Create Bezier curve from two points and normal vectors on them
·
OTE12553
Cubic Polynomial from two points and two tangent vectors
Graphics
·
OTE10824 [ALM2120] Improved verification of loads
·
OTE12256
Display loads as sections with labels
GUI
·
OTE12530
GUI for panels update
·
OTE12543
Add line color setting for FEM Shells
·
OTE12568
Add ability to change colour for plate edges.
·
OTE12599
Replace the S (Simplify Topology) and V (Verify Model) icons in toolbar
· OTE12711 Separate browser folder for dynamic sets
·
OTE12878
Add control over display of load graphics for line and surface loads
·
OTE13008
Turn off visibility for various FEM elements in Results with Mesh view
·
OTE12050 [Pile/soil] Pile capacity plot in GeniE
·
OTE12239 [GUI/MESH] Allow the user to label angle in
mesh view
·
OTE12348 [Meshing] Create tick box in analysis dialog
box, allowing the user to turn of load generation on mesh
·
OTE12349 [Meshing] Deleting results when starting mesh
editing will no longer allow undo due to performance
Guiding geometry
·
OTE12593
Projection of one or more curves onto a plane
Loads
·
OTE10817
Marine Growth as function of Z level in import relative to
seabed
o OTE10219
SACS import: Handle Marine Growth as function of Z level relative to
seabed
o OTE10220
WAJAC import: Handle Marine Growth as function of Z level relative to
seabed
o OTE12646
SACS/WAJAC importer: Convert marine growth property as is and as the default
option
o OTE12647
GeniE: Add setDefault
option to MarineGrowthZLevel property
·
Load
annotations in graphics view
o OTE12794
Add load annotations and control over load arrows to plate edges
o OTE12795
Visibility for point loads not a beam ends should be controlled by point load settings,
not line load settings
o OTE12701
Allow load arrows to be clipped, not cut, by annotation slices, in the same way
as load annotations.
o OTE12595
Load labels should respond to unit formatting
o OTE12588
Auto-align load annotations vertically when above/below the model
o OTE12512
Allow cut planes and cut planes slices to clip annotations.
o OTE12513
Set maximum number of load annotations to display
o OTE12626
Add create annotation slice commands
o OTE12514
Hide load annotations when user moves camera
o OTE12515
Add option to display load annotations in world space
o OTE12516
Smart position load annotations based on relative position to surface and
camera viewpoint.
·
OTE12563
Select compartments and auto generate load cases to HydroD
Meshing
·
OTE12232
Automatically convert loads to mass
o OTE12312
Create GUI for loadsAsMass
o OTE12313
Remove regular loads when loadAsMass set to
true
o OTE12314
Create masses for point loads when loadAsMass set to
true
o OTE12315
Create masses for line loads when loadAsMass set to
true
o OTE12863
User should be able to see the results of the conversion of loads to
masses.
o OTE12864
To serialize information about loads converted to masses on XML.
o OTE12865
To add a table of loads to mass to the Report.
o OTE12862
To store information about masses converted from loads.
Reporting
·
OTE10401
Report function to (optionally) loop through selected structure sets for
Structure and Loads
·
OTE12597
Envelope of user defined list of Loadcases / load combinations
·
OTE12738
Reporting : Add set and load looping to FEM and Codecheck chapters
·
OTE11902
Performance: Cache beam eccentricities
·
OTE12712
Report generator - add option for 2 pictures per page
·
OTE12867
To add 3 new columns to the GeniE browser for LoadCase related to load-to-mass.
Structure
·
OTE12812 [ALM2298] Implement Divide by box
· OTE12886 [ALM2298] Support for beams in Divide by box
SACS Import
·
OTE12519
SACS import: Activate Domain
Model Importer
·
OTE12520
SACS import: read pile end bearing area and convert it as a compression factor
for the Q-Z curve
·
OTE12551
SACS import: Dialog to be harmonized with FEM import dialog
·
OTE12745
SACS Import: Increase the limits of the converted SEA cards to 3000
·
OTE12883
SACS import: Convert unsymmetrical Q-Z curves
·
OTE11830
- SACS import: Add option for wind calculation approach
XML & GNX
·
OTE12000 [Genie data access] [XML] Default properties
and active analyses are not stored on XML
·
OTE12536 [Genie data access] If model has not been
modified, do not ask user to save when closing workspace. Feature limited to
GNX database
·
OTE12796
GNX shall always contain FEM file(s)
Bugfixes
Analysis definition
·
OTD11282
Eigenvalue analysis failed in 7.2 with Solver egMultifrontLanczos,
fixed by automatically setting MOLO=0 in Sestra.inp
when this solver is used.
·
OTD11613
The unit of R1.sin file is wrong, when checking in GeniE,
Xtract, Cutres after import .bdf file
·
OTD11932
GeniE: Generated Wajac
input file - revise the Warning messages to Error with new limits of 3000 SEA
cards and 200000 load cases from SEA cards
·
OTD11998
Clean JS: Water depth value in seastates needs
explicit units declaration
·
OTD12177 [Analysis] repeatedly turning autoimport on and off in analysis will create many
instances of loadcases in analysis.
·
OTD9694
Linearised spring dialog only shows load
combinations
Code Check -
General
·
OTD10576
<no loadcase> instead of Worst Case (CC) shown
after reopening workspace
·
OTD5225
GeniE crashes when editing properties of an empty run
in a capacity model
Code Check - Beams
·
OTD9524
Norsok 2004 member options. Missing option Use ISO
19902 for Cone Elastic Hoop Buckling Strength in report listing
·
OTD10962
ISO and Norsok joint check: Geometric limit to just
change gamma, not thickness
·
OTD11670
GUI support for ISO and Norsok joint check: Geometric
limit enhancement
·
OTD11294
API WSD joint validity range, error correction when double-skin grouted joint
·
OTD11602
Tensile strength property cannot be disabled
Code Check - Plates
·
OTD10824
Picture in bracket toe dialog not readable
·
OTD11806 [ALM2293] Yield screening defect - Stringer
heel
·
OTD11997
Range contour Palette missing for Uf-VonMises
Data exchange
·
OTD10390
Pressure load (wind) on equipment wrongly exported to .js
files
·
OTD11844
Fail to export GNX and FEM file if workspace name has symbol '/'
·
OTD11895
Export FEM or ACIS SAT file cause GeniE crash if
workspace name has %
·
OTD12322
Cargo load for M-Full condition for Bulker is not correct when importing ruleloads with mm-unit of GeniE
based on CSR BC & OT
FEM Import
·
OTD10793
Old FEM import crash for B5 tutorial mode with conical concept
·
OTD11512
FEM import: GeniE crash when importing BELLO2 data
·
OTD11641
FEM/SACS import: Error in Domain Model Importer
·
OTD11658
Domain Model Importer gives unexpected loads (SACS regression test
X558C)
·
OTD12058
Unknown error when export FEM file if FEM import without load results step in
analysis
Geometry modelling
·
OTD11599
Joint gap calculation. Brace skipped from gap
calculation
·
OTD11606
Severe performance issue related with adding stiffeners on outer shell
·
OTD12116
Cannot create shortest curve on edge
·
OTD12210
Compartment of arbitrary shape becomes a box, when setting a liquid content
·
OTD7886
Unable to divide shell
Graphics
·
OTD11147
Reporting: Beams missing when generating report
·
OTD11155
Delay in display for Stand Alone Beams dialog
·
OTD11242
Environment graphics do not update when switching to <no loadcase>.
·
OTD11285
Floating point symbol and support point in snapping
·
OTD11931
Mesh edges not visible in Results with Mesh view.
·
OTD12009
Mesh lines/edges disappear after modifying line
thickness.
·
OTD12050
The model view shows wrong
·
OTD12128
Graphics NOT update when switch view
·
OTD12129
Label not saved when Save Model View
·
OTD12159
Mesh elements changed in Mesh-all view after delete object without
re-mesh
·
OTD12137
Error message shown when SaveView with location
·
OTD10544 Crash displaying mesh
GUI
·
OTD9560
Edit beam dialog has annoying behaviour
·
OTD10221
Directional Dependent Morison Coefficient- not greying out Cmz
field when checking constant Cm values
·
OTD10633
Input-box of Name prefix in Import XML dialog not shown normally
·
OTD10822
Import of GNX into workspace with different database units is
broken
·
OTD10990
Remove Preview box in dialog Create Shell Sweeping a Profile along a
Trajectory
·
OTD11156
'Number of rows' description of hydro Morison Global Direction property shows
wrong
·
OTD11250
Environment and Loads settings get corrupted
·
OTD11314
Added Mass options in Genie not keeping all options checked
·
OTD11340
Joined offsets unclear and not updating
·
OTD11375
Set active loadcase after import xml not take
effect
·
OTD11481
State names in registry should not include namespaces
·
OTD11491 [GUI] GeniE crashes
when editing properties of hole.
·
OTD11554
GeniE runtime error when edit beam offset
·
OTD11557
The preview of linearly varying offset cannot take effect when edit the beam
again
·
OTD11655
Colour of node number when locating (Tools >
Analysis > Locate FE) is yellow which is awkward
·
OTD11656
Two places in View Options dialog for changing node number colour
and likewise for elements. This is confusing.
·
OTD11714
Code checks unavailable when running with GENIE_LITE license
·
OTD11739 [View Option] the items in Mesh Node should be
removed from sub node
·
OTD11816
Duration column of Meshing activities of Activity Monitor shows wrong values
after FEM and SACS import
·
OTD11878
Some invalid menu items on the Environment menu, should only be visible in DeepC
·
OTD11919
Create/Edit direction dialog messed up with CSR tank code check run
dialog
·
OTD12028
GNX model takes forever to import and save
·
OTD12049
Genie should not attempt to open non-existing files from RMB menu in ActivityMonitor
·
OTD12076
Toolbar: Loadcase bar still shown Worst Case (CC)
when select <no loadcase>
·
OTD12089
Cannot edit width fraction in compartment content along with repose angle
·
OTD12189
Crash when close workspace with active cut plane or annotation
slice
·
OTD12265
Crash after delete capacity manager
·
OTD3820
Cannot sometimes delete plates from browser when in mesh view
(IM4411)
· OTD10897
Wrong, at least unintelligible helper text in MeshOption
dialog
· OTD11954
Generate input files button not coordinate with edit pile soil analysis
dialog
· OTD12188
Errors in Properties dialog of Point Point
Connection
Loads
·
OTD11090
Load cases and combinations missing names on T1.FEM file missing when running
pile-soil analysis
·
OTD11774
Loads are not always recomputed before meshing
Meshing
·
OTD11595
For a particular model: Error message unknown error
occurred during meshing. ...no RTTI data ...
·
OTD11958
Error in meshing after FEM import and delete beam with applied load
·
OTD12224
Beam element not removed from mesh view after delete concept / RemoveOrphanElements operation
·
OTD4693
Old mesh is still shown when switching to another analysis with no
mesh
·
OTD10030 [Mesh Edit] Wrong NDOF and ODOF
for new nodes of membrane elements
·
OTD10776 [Mesh Edit] CRASH after undo
& redo mesh edit operation
·
OTD10807 Unknown beam element added during partial
meshing
·
OTD10995 Ghost mesh created for beams whose element numbers created
from beam names
·
OTD11094 sestraTri warning in GeniE, but not in Sestra
·
OTD11102 Beam elements re-occur in detail box after force remesh
·
OTD11178 [MeshEdit]
Fail in RefineGrid after Remove and Add elements on
intersection edge
·
OTD11202 [PartialMeshing]
Ticking off lock concepts after meshing at mesh acitivty
does not have any effect after initial meshing
·
OTD11474 [Mesh/edit] Unwanted align
nodes in element grid failed message
·
OTD11482 [Mesh Edit] Error about result
still exists after delete results in mesh editing
·
OTD11508 Fail to remove element in holes after create new hole and
update mesh
·
OTD11563 Fix duplicated MISOSEL and GECCEN cards
·
OTD11817 Masses from PointMass do not sum with masses from loads converstion.
·
OTD11850 [MeshEdit]
move node does not work
·
OTD11853 [PartialMeshUpate]
Infinitebelow z-level bc
not updated when changing pilecharacteristics and
doing partial meshing
·
OTD12005 Feature Edge with 2nd order element cause error (Element
is connected twice to the same node)
·
OTD12051 Duplicate node in partial mesher
after delete PPC
·
OTD12143 No JS log of DeleteLoads after
undo and remove elements from hole
·
OTD12146 GNX database: change connection point of X joint cannot
trigger update mesh in Partial mesher
Reporting
·
OTD11725
Reporting: Figure definition external image edit box does not work
·
OTD12060
Reporting: If paste does not support, the cut node should keep
there
·
OTD12084
Reporting: Tree view is not synchronised with element
tree
·
OTD12097
Reporting: Dynamic Sets should be reported
·
OTD12100
Figure file got deleted after change figure name and save report
again
·
OTD12202
Incorrect results when specifying FEM units different from database
units
·
OTD12219
Cannot save report after quit/restart GeniE
Reporting Completed
·
OTD12267 [Report] Loads chapter shown differently after
export & import XML when uncheck Select loadcases
SACS Import
·
OTD9472
SACS import: Ensure correct thermal expansion coefficient
·
OTD9770
SACS import: When override displacement area less than 1.0mm^2, the flooded
area is not correctly set up
·
OTD11422
SACS import: 'F' option in MEMOV/GRPOV cards not handled correctly
·
OTD11439
SACS import: Enhance accuracy of marine growth data
·
OTD11452
SACS import: Enhance classification of clean/fouled condition of member from
marine growth profile
·
OTD11500
SACS importer: Read and import factors of T, Z, P and Y in the format of 1.38-4
for PSI input file
·
OTD11506
SACS import: Define linear variation when psi input file have
zero value in soil bottom
·
OTD11522
GeniE Not Responding during SACS import
·
OTD11589
SACS import: Format error of CGWD card
·
OTD11632
SACS import: Fix bug in L- and Channel section calculation
·
OTD11640
SACS import --> File, export, FEM
--> Unknown error
·
OTD11659
SACS import: GeniE crash when importing SACS model containing
unsupported CDM card
·
OTD11933
SACS import: Increase the number of decimals for the converted marine growth
density factors
·
OTD12156
SACS import: Design condition not properly defined
·
OTD12218
SACS import: Different JOINT names may be converted to duplicate GNODE
identifier
Scripting
·
OTD6432
Incorrect handling of division with two length units
·
OTD6434
Error when using print() with concatenated text and value.toString inside
Structure
·
OTD3816
Old Compartment is not deleted after moving structure
·
OTD5493
Divide with structure gives error
·
OTD8322
Point-to-point connection not correct after moving a beam end
·
OTD11284
Crash when copy-mirror half cargo hold structure
·
OTD11577
Plate normal vector is incorrect for attached model
·
OTD11763
Problems creating guiding points with reference to
beam ends
·
OTD11814
Copy plate creates overlapping plates when using the new default ( ModelTransformer )
·
OTD11941
Divide beam fails on a beam with eccentricities in local system
·
OTD12020
GeniE crashes when create any beam or plate
·
OTD12081
Deletion of plate in model very slow.
·
OTD12122
Unacceptable performance when copy mirror model
·
OTD12124
Import model with capacity data takes long time by XML file
·
OTD12144
Error message shows when mirror copy half VLCC
·
OTD12184
CSR BC&OT and DNV GL rules : Min corrosion
addition should be deducted when no corrosion addition is assigned
· OTD11300
Crash/workspace corruption when undoing divide operation on plates
XML & GNX
·
OTD11252
Slow performance when importing XML with many curved beams
·
OTD11511
XML : holes' set dependency lost after gnx export and import
·
OTD11721
Crash when re-open a workspace created by reading old xml
·
OTD11791
Wind load on equipment not applied when importing mm/N XML into m/N
workspace
·
OTD11889
Exporting mirror equipments to GNX sometimes fails
·
OTD11897
Crash in export gnx after export xml
·
OTD12239
The js was not correct when import rule load xml
Compatibility
In order to use the DNV GL or CSR BC & OT
(also named CSR-Harmonised) (Common Structural Rules
for
Bulk Carriers and Oil Tankers, IACS, January
2015. Effective of July 2015) code check for panels,
then Nauticus Hull
2015 (release October 2015) is required.
In order to use the CSR-Tank (Common Structural
Rules for Double Hull Oil
Tankers, IACS, July 2008) code check for panels
(including PULS), then Nauticus
Hull 2015 (release October 2015) or as a
minimum Nauticus Hull 2014 - Patch 2 is required.
Documentation
User Manual - Vol 1
·
Updated
Chapter 3.4.7 Holes, added text: Density
can be assigned to feature holes.
·
Updated
chapter 3.1.13.9 and 3.1.13.11 Reporting - with regard to
the below listed improvements:
o OTE10539 Min/max
labels should overlay the model so they are always visible
o OTE11877 Add filter
for load names to report templates
o OTE11878
Automatically assign "Analysis" and "Capacity Model" when
report created from template
o OTE11879 Allow
report name to be specified in report template.
o OTE11880 Create
Report figure from existing modelview
o OTE11881 Add filter
for labels so that only labels with certain values are displayed
o OTE11063 Added
chapter 3.15.6 Surface load: Contour plotting of
pressure (separate load on each side of plate).
User Manual - Vol 2
·
OTE11275
Updated chapter 5.4.2 The Wave Load Run: The option “Include longitudinal
hydrodynamic added mass” added to supports an option in Wajac:
ADMAS=4.0 of the MASS card.
User Manual - Vol 3
·
OTE11603
Added chapter 6.8 Mesh options for hole: Remove elements from hole
based on area criterion
·
OTE10375/OTE12186
Updated chapter 6.2.1.3 Added description of new
feature : Adjust edge density using ratio
User Manual - Vol 5
·
OTE12209 Updated GUI dialogs, the old denomination “CSR Harmonised”
is updated to “DNV GL or CSR BC & OT”.
·
OTE11974 Updated chapter 5.3.1.1 and 6.4.1.1 : DNV GL
rules for Max/Min corrosion addition in buckling check.
·
Updated
illustration in chapter 6.4.2.1: The Corrosion Addition Rule may be set on the
General tab of the capacity run of type “DNV GL or CSR BC & OT” or “CSR
Tank”.
·
Updated
illustration to include “Hole is reinforced with not-modelled buckling
stiffeners”.
Reference
documents:
·
Updated
reference documents for code check: API WSD, Norsok,
Eurocode.
·
Updated
reference document for SACS import (Sacs To FEM and
Sacs Import Guidelines)
·
Updated
note on license checks - new license type GeniE.RCLite
(for use in combination with Nauticus Hull) and
extension REFM (RefineMesh),
New features
GUI
·
OTE11798
Improve Create Beam dialog: Allow creation of sections and materials from
Create Beam dialog
·
OTE11948
Improvement to the Flat-Region dialog
·
OTE11949
Improvement to the Profile dialog
·
OTE11973
License check - extension RefineMesh (REFM)
·
OTE11975
License check - GeniE.RCLite
·
OTE12209
CSR-Harmonised renamed to DNV GL or CSR BC & OT,
only minimal change in GUI
Graphics
·
OTE11063
Contour plotting of pressure (separate load on each side of plate)
·
OTE11818
Joint visibility definition (show vs. don't show) should be stored with View
Options
Geometry
·
OTE11740
Join and Multiple Join of (a) NURBS for constructing composite (rational)
Bezier curves (b) polygonal arcs for calculating polygon intersections
Meshing
·
OTE8589
Support Longitudinal mass nonstructural elements in partial mesher
·
OTE8590
Support Prefer point mass as node mass in partial mesher
·
OTE10375
Implement an automatic element size increase based on other edges on
face
·
OTE12039
Set Partial mesher as default
·
OTE11603
Remove elements from hole based on area criterion
·
OTE12186
Take into account existing mesh densities when determining mesh
densities for concepts needing mesh update
·
OTE12228
Support partial meshing of scantlings change (corrosion addition mesh
option)
Analysis
definition
·
OTE11275
Enhanced dynamic mass calculation option for Wajac
·
OTE11530
Add a feature of ABS Wind profile force calculation
Frame code
check
·
OTE11256
GeniE: API joint can code check for double skin grouted
joint
·
OTE11700
GeniE - API RP2A 21/22 Tubular joint code check:
check the sign of Mipb for C2 item in Qf calculation for K type of joints
·
OTE11701
GeniE - API RP 2A 21/22 Tubular joint code checks -
Print out the member force in the format of Pa, Mipb,
and Mopb for brace and chord
·
OTE11749
Eurocode 3 - Allow user defined lateral torsional buckling curve per table 6.4
and 6.5
·
OTE12084
Eurocode 3 - Add member option to select buckling curve for stiffener spacing
·
OTE11750
Eurocode 3 CodeCheckDetails - alphaLT
for lateral torsional buckling check should be reported along with chiLT values
·
OTE11835
GeniE API tubular joint code check: Do not change
beam dimensions in the capacity calculation when parameters outside of validity
range
·
OTE12064
API WSD 2005/2014 - Add new options related to Joint Validity Range
Plate code
check
·
OTE11974
DNV GL Max Min rules for total corrosion addition can be applied in Buckling
check
Reporting
·
OTE11877
Reporting: Add filter for load names to report templates
·
OTE11878
Reporting: Automatically assign Analysis and Capacity Model when report created
from template and only one present in model
·
OTE11879
Reporting: Allow report name to be specified in report template
·
OTE11880
Reporting: Allow figure definitions to reference modelviews.
·
OTE11881
Reporting: Add filter for labels so that only labels with certain values are
displayed
·
OTE10590
Reporting: Global min/max labels are included in the bounds for Auto view
calculation
·
OTE10450
Reporting: Text labels should overlay geometry when in Auto axis-aligned view
·
OTE10539
Reporting: not visible max/min labels.
·
OTE11871
Eigenvalue analysis - Print mass participation and accumulative factors
·
OTE11901
Performance: Cache compartment volumes to speed up load sum reporting
SACS Import
·
OTE11777
SACS import: Make SACS importer able to handle load case name containing
special characters, such as - and +
·
OTE11800
SACS import: consider the water depth override in DEAD line during the
conversion
·
OTE11883
SACS import: support Cd/Cm factors defined on GRPOV/MEMOV lines
·
OTE12026
SACS import: Support SACS ABS2 Wind profile
Data exchange
·
OTE12000
XML Default properties and active analyses are now stored on XML
Bugfixes
GUI
·
OTD9713
Join curves crash and memory leak
Graphics
·
OTD11167 Improved performance of displaying pressures on
the outer shell
Scripting (JS)
·
OTD10886
Beam end coordinate Jscript does not work anymore
Meshing
·
OTD10746
[Mesh Edit] Wrong behavior for membrane element with 2nd order mesh
·
OTD11160 [Mesh Edit] SplitEdge
on triangle should allow quads to be formed
·
OTD10891 GeniE can't create
compatible FEM and Wajac input files when
"Element numbers from beam names" option turned on
·
OTD10675 Extra BELOAD1
load lines create in FEM file crashes Usfos converter - line loads with extremely short extent
should be ignored
Frame code check
·
OTD10610
Code check: Aisc 360-10 minor error
corrections / updates
·
OTD10664
Code check: N-004 rev 3 error calculating gammaM
when user-given value is different from 1.15
·
OTD10952
Add useFixedMaterialFactor option in NORSOK N-004
2013
·
OTD10782
Code check : API WSD 21st & 22nd joint
check. Calculating parameter A and Qf_axial
not correct for the 50% check
·
Plate code check
·
OTD10577
After changing CSR-H code check panel properties - result is not invalidated
(no result) in browser
·
OTD10731
Screening Uf-Vonmises - only toe elements are visible
·
OTD11166
CSR code checks : Default option (Yes) was
not handled correctly.
·
OTD11177
Changed stress calculation in curved panels.
Reporting
·
OTD10715
Reporting tool: crash for big model
·
OTD11002
New Report does not write javascript
·
OTD11041
Reporting: Cut and paste of labels in capacity models view is incorrect
·
OTD11129
Graphics Reporting: Label type shows wrong in capacity models
SACS Import
·
OTD9725
SACS import: PSI import should handle missing soil layer at pile tip
·
OTD10196 SACS
Import: Handle CDM line with AP option
·
OTD10662
SACS import: Fail to import one SACS file because AMOD card refer to not
existing load cases
·
OTD10880
SACS import: Import may fail when load condition names contain non-alphanumeric
characters
·
OTD10976
SACS import: Wind profiles may be incorrectly assigned to load cases in SACS
wind import module
·
OTD10996
SACS import: Wind import fail if LDOPT card is incomplete SACS
Import
·
OTD11019
SACS import: Ignore wind forces in wave load cases when Member Load Option has
value 'I'
·
OTD11105
SACS import: The model has neither constant nor functional Air Drag Coefficient
properties assigned
FEM Import
·
OTD10607
Import FEM file followed by Undo causes GeniE to hang
In order to use the CSR-Harmonised
(Common Structural Rules for Bulk Carriers
and Oil Tankers, IACS, January 2015. Effective
of July 2015) code check for panels,
then Nauticus Hull
2015 (release July 2015) is required.
In order to use the CSR-Tank (Common Structural
Rules for Double Hull Oil
Tankers, IACS, July 2008) code check for panels
(including PULS), then Nauticus
Hull 2015 (release July 2015) or as a minimum Nauticus Hull 2014 - Patch 2 is required.
Updates
since last official release, i.e. V7.0-14 are listed below:
Documentation
User Manual - Volume 1
|
OT |
Document |
Add/Update/Chapter |
Description |
|
|
|
|
|
|
OTE11435 |
Vol 1 |
Added chapter 3.1.13.1 |
Cut, Copy
and Paste Chapters in the report |
|
OTE11499 |
Vol 1 |
Added chapter 3.4.1.1 |
The
Section dialog - Explanation of the new image showing the section in its
correct scale. |
|
OTE11500 |
Vol 1 |
Added chapter 3.4.7 |
Holes - Documentation on the Hole Concept |
|
OTT2338 |
Vol 1 |
Added chapter 3.8.2.2 |
Assign Joint Can |
|
|
Vol 1 |
Updated chapter 3.13 |
Mesh Locking feature deprecated |
|
OTE11648 OTD9893 |
Vol 2
|
Added chapter 3.6.9 |
Linerarised Pilehead Springs |
|
OTE10582 |
Vol 2 |
Updated chapter 5.3 |
Support of
“Direction Dependent Morison coefficients”. Added info about the Morison
global direction. |
|
OTE11490 |
Vol 2 |
Updated chapter 5.4.2 |
Support
of separation of buoyancy and weight of marine growth. |
|
|
Vol 3 |
Added chapter 7.20.5 |
Sniping of beam ends when refining mesh |
|
|
Vol 3 |
Updated chapter 7.20.2-4
|
Resulting
plate elements Tolerances Connections
to surrounding mesh |
|
OTE11502 |
Vol 3 |
Added chapter 7.21 |
Description
of the Detail Box Concept |
|
|
Vol 3 |
Added chapter 10.4.5 |
Description
of Fem Import : FEM Repair tab. |
|
|
Vol 4 |
Updated |
Added the
two following codechecks to the lists of available codechecks : API-WSD
2014 - Offshore structures AISC 1989
(335-89) - Onshore structures |
|
|
Vol 4 |
Updated Chapter 3.3.1 |
Added info
regarding cap end forces when running Wajac |
|
|
Vol 5 |
Added Chapter 6.10 |
Yield Screening |
|
OTE11609 |
Ref |
Updated |
Reference documentation for Eurocode |
|
OTT2337 OTE11628 |
Ref |
Updated |
Reference documents for AISC |
|
OTT2337 |
Ref |
Updated |
Reference
documents for API_WSD |
|
OTT2325 |
Ref |
Updated |
Reference
document, code check ISO; Hoop Buckling stress usage factor, updated
documentation, no changes in GeniE |
|
OTE11509 |
Ref |
Added |
Added the reference document for AISC 9th |
|
OTE11508 |
Ref |
Added |
Added the
reference document for API WSD 22nd |
|
|
Tutorials B1,
B2, B4, B5, B6, B8 |
Updated |
General
fixes, updated screen dumps, fixed spelling mistakes etc. |
|
|
Tutorials A13, A14 |
Added |
Added
Tutorial A13 - Meshing a tubular joint Added Tutorial
A14 - Mesh refinement using feature "Refine Elements in Box" |
|
|
Guideline |
Updated |
Partial Meshing updates
|
|
|
Guideline Ref |
|
Sacs
Import guideline
doc and reference doc updated wrt. new features. |
New features
GUI
o OTE 10783
GUI support of separated buoyancy and marine growth weight hydrostatic
calculations
o OTE 10579
GUI support of “Direction Dependent Morison coefficient”
o OTE 10212
Add colour settings for label background and boundary
o OTE
8960 Object properties of point sets with
named points should show definition (indices, spacings
etc)
o OTE 10541
Reporting tool - display configuration improvement
o OTE 10666 [EditMesh] Allow
dragging of enhance element quality to enhance all elements under the cursor
o OTE 10727
Implement section properties dialogs with preview
o OTE 10818
Seabed elevations for hydro (current & marine growth) to be made default
o OTE 11405
Hole Menus
o OTE 11483
Yield screening GUI
o OTE 11578
Enable dimension tool in mesh view
o OTE 11481
Implement GUI for import linearized pile matrix
o OTE 11406
Remove mesh locking (deprecated feature) from RMB menu in GeniE
o OTE 11549 [MeshQuality] Add
Undo/Redo support for running screening / report and repair from the GUI.
Structure
o OTE 10688
Make command for automatic assignment of Joint Cans
o OTE 10803
Create the "Hole" Concept
o OTE 11130
Holes From Profile Curves
o OTE 11198
Holes From Profiles. Storage of the transformation
3d->2d of a general NURBS profile
o OTE 11296 [Holes] Create new property to define hole
meshing properties
Guiding
Geometry
o OTE
2883 Extrude Curve/Surface feature.
Geometry
(ACIS)
o OTE 11306
Plates with holes in compartments
o OTE 11351
Calculation of the Geometric Characteristics of a Hole
Graphics
(Hoops)
o OTE 10689
Upgrade to HOOPS 20.40
o OTE 11621 [Mesh Edit] Beams converted to plates must have
a different color/transparency setting than the beams.
Meshing
o OTE 10081 EditMesh: Refinement of non-structured areas
o OTE 10391
Implement support for refinement of a region without including the transition
area in the selected region.
o OTE 10679 [EditMesh] Refine
elements inside box
o OTE
8566 [Mesh
Edit] Implement Edit nodes
o OTE 10517
Support snapping of node-to-node
o OTE 10551 [Mesh Edit] Support 2nd order elements in mesh
editor
o OTE 10586
Prevent MoveNode from moving mid nodes of second
order elements.
o OTE 10555 [Mesh Edit] The refined mesh option made more
general so that the user can specify the mesh size.
o OTE 10558 [Mesh Edit] Align mesh lines between two elements
o OTE 10559 [Mesh Edit] Align mesh by selecting end nodes
and move aligned nodes by a vector
o OTE
8853 User should be able to select
two nodes and align everything in between
o OTE
8855 User should be able to select
aligned mesh edge between two nodes and drag it up and down
o OTE 10562 [Mesh Edit] Optimize element quality on
selected elements in mesh edit mode
o OTE 10795 EditMesh: Optimise MeshQuality operation so that it works smoothly with
snapping enabled.
o OTE 10601
[HPALM870] Automatic fine mesh modelling
o OTE 10973 [HPALM870] Sniping property
o OTE 10974 [HPALM870] Idealization for holes
o OTE 10975 [HPALM870] Remove elements inside holes in a
mesh edit operation
o OTE 10667 [Mesh Edit] Fill gaps in mesh with elements
o OTE 10886 [HPALM870] Beams to plates
o OTE 11031
Create mesh edit operation for converting a single beam element to plate
elements
o OTE 11498
Add possibility to align nodes using dialog box input instead of dragging
o OTE 11599
Remove all concept information for beams converted to plates
o OTE 11602
Create linear dependencies for all nodes at end of beam converted to plates after mesh refinement
o OTE 10029
Add possibility to retrieve node from support point via scripting
Frame code check
o OTE
9134
Hoop Buckling stress usage factor
o OTE
9288
Code check:
AISC check of L section should be updated to
also handle bending moments
o OTE
9423
Code check:
AISC, add usage factor with respect to pure axial tension
o OTE 10259
Code check: Allow for stiffener spacing given longer than member length
o OTE 10276 Code
check: ISO 19902 Tubular Joint Checking - Negative moment capacity
o OTE 10490
Code check: Improve print for member check according to
EC3
o OTE 10548
Code check: API WSD 2005 - Brace axial load (50% non-seismic, 100% seismic) in joint
check.
o OTE 10599
Code check: Improve the API WSD 2005 joint check
o OTE 10759
Joint Can code checks: for K joint the reported CanFactor
should be 1.0
o OTE 10816
Code check: Implement API RP 2A-WSD 22nd edition, Nov. 2014
o OTE 10819
Code check: Implement AISC ASD 9th edition (335-89)
o OTE 10909
Eurocode: add output of Aeff and NcrTF
o OTE 11241
Eurocode - Use the interaction according to Section
7 in 1993-1-5
o OTE 11797
Code check: Aisc 360-10, add Lp
and Lr to intermediate print
o OTE 10556
Code check: Add UseFiftyPercentCheck option to Joint
Member Options report of API WSD 2005
Plate code check
o OTE 10825
Yield Screening according to IACS CSR for BC & OT
(July 2015) - Pt 1 Ch 7 Sec 3
o OTE 11506
Screening for fine mesh - needs color-coding of panel/detail type
Reporting
o OTE 11291
Finish reporting XML for workspace and template i/o
o OTE 11293
Add separate settings for font colour and labels
o OTE 10808
Import and Export of Report Templates
o OTE 11202
Add rules for pasting report elements
o OTE 11053
Add cut/copy/paste to report tree in Save Report dialog
Data
exchange
o OTE
3643 Make JS script commands for export to RHINO
Wajac
import
o OTE 10580
WAJAC import: support “Direction Dependent Morison coefficients”
o OTE 11278 Wajac import: Handle separation of buoyancy and weight of
marine growth
FEM
Import
o OTE 10632
FEM import: handle conical concept role of beam segments in new and old FEM
importer
o OTE 11019 [Mesh Quality GUI] Add new Tab to FEM import
with single Report & Analyze button.
SACS
Import
o
OTE
11074 SACS import: Support "Direction Dependent Morison
Coefficients"
o OTE 11277
SACS import: Handle separation of buoyancy and weight of marine growth
o OTE
7735 SACS import: Improve handling of
buoyancy
o OTE
8757 SACS import: Improved behaviour when "Import wave loads" is unchecked
XML & GNX Export/Import
o OTE 10578
XML support of “Direction Dependent Morison coefficient”
o OTE 11280
XML export/import: Handle separation of buoyancy and weight of marine growth
o OTE 10552
Code check: Add UseFiftyPercentCheck option to XML
import/export in API WSD 2005 joint check
o OTE 11724
Handle XML export/import of capacity panels
o OTE 11259
Implement serialization of idealised equipments on mesh
o OTE 11496 Sniping
properties and mesh options for holes on XML
Bugfixes
GUI
o OTD
9959 GeniE crash
after input Indices when create Grid
o OTD 10571
Crash when re-opening existing workspace (after reading external resultfile and exiting GeniE)
o OTD 10386
Script error and GeniE crashes after undo/redo delete
o OTD
2445 Toolbar: Loadcase
bar shows '<no loadcase>' when repeated
selecting Worst Case(CC)
o OTD
9572 Create new analysis dialog doesn't
look good
o OTD
9574 Load Interface Dialog title is
"Property Sheet"
o OTD 10531
GUI: Missing browser icons for Conical and General sections
o OTD
9351 Number of selected elements for
stand-alone beams shows wrong
o OTD
5267 Missing documentation of mesh rule
option: Use uniformized face parametrization
o OTD
7192 Curve on surface disappears after
lock/unlock computer
o OTD
9134 When selecting both plate(s) and
beam(s), Mesh Property tab is not shown in Property dialog
o OTD 10212
Selection not shown in graphics window when color coding active
o OTD 10250
Sub-menu of "Remeshing" NOT work when
invoke context menu from graphic window
o OTD 10324
Internal element number got filtered when click "Add Element" button
twice in LocateFE dialog
o OTD 10353
Dynamic set dialog shown abnormal
o OTD
8633 Anti-aliasing not turned off on AMD
machine running Intel GPU
o OTD 10471 GeniE returns error after deleting a section and setting
another section as the default
Structure
o OTD 10538 [Holes] Create hole causes unknown exception
o OTD
5169 Compartments change name to
"dummy" after XML import
o OTD
6072 Divide Beam with structure option is
not working
o OTD
9171 Plates with different permeability
should not be joined
o OTD
9387 Performance was declined when create
stiffeners by some hull design tool commands comparing with 6.9
o OTD
9536 Stiffeners directions shows wrong when
create vertical stiffeners on side shell
o OTD 10351
Unnamed compartment created for Example A7
o OTD 10562 [Holes] Instability issues with mm databases
o OTD 10682
Can NOT create punch by profile curve
o OTD
9821 wrong corrosion addition values for
ORS
o OTD
9874 Add constant value will be back to the
value of last time in Edit Beams Aligned Offset
o OTD 10540
Crash when apply mesh option for holes to detail box
o OTD 10548
Fail to add beam into set by command files from SnackPack
o OTD 10402
Model cannot be removed from set in mesh-all view
Analysis definition
o OTD 10564 GeniE: Define Wind Profile and generate a WIND or WINX card
o OTD
4924 Error when placing equipement
into global loadcase
o OTD 10591
Numbers with only one significant figure are introduced in WAJAC.inp
file without decimal dot
Geometry (ACIS)
o OTD 10320
Example A5 can not be imported as Internal ACIS error
o OTD 10361 Unnamed
beams were created after import some JS
o OTD 10367
Model change to 2D view after copy JS command of flat region
o OTD 10546
Unnamed compartments
o OTD10715
Fixed memory leak compartment volume computation
Graphics (Hoops)
o OTD
9844 Model disappears on rotation
o OTD
9508 Beam sections oriented in 1,1,1
direction are drawn incorrectly
o OTD
9846 Low efficiency when manipulating model
in Mesh View.
o OTD
9907 Hoops-related crash in regression test
X906_515G (and X906_515G_GNX too)
o OTD 10197
All kinds of model view shows wrong in graphic window
o OTD 10247
Beam element not shown in deformed value in Result-with Mesh view
o OTD
2446 Improve color coding for global min/max
display of results with white background
o OTD
2450 Name Set failed when selecting in Mesh
View
o OTD
5173 DX9 on AMD machine: divided segments can not be
selected
o OTD
9168 Environment should show when change
view to 'Modelling - All'
o OTD
9236 Label 'Fem Line Load' doesn't work in
view option
o OTD 10245
Color code legend can not fully show if enlarge its
text size
o OTD 10248
Plate not dimmed in color coding
o OTD 10249
Point mass shown in capacity model view
o OTD 10258
Color code for beam not handled correctly
o OTD 10265
Panning the model takes about 2-3 seconds before it starts.
o OTD 10339
Cut plane not removed when change saved model view
o OTD
5831 Graphics does not update until
operating camera when Select Cans/Stubs/Connected beams of Joint
o OTD
8599 Two properties overlapped for color
code
o OTD
8689 Highlight element in "Locate
FE-tool" is not working
Loads
o OTD 10133 GeniE: Area wind load calculation - Extreme API 21 option
o OTD 10344 GeniE crashes after open load case applied load folder
Meshing
o OTD 10557
Load combinations is not handled correctly in partial meshing of piles
o OTD 9887 [Mesh Edit] Material and Geometry data for
element lost after undo and refine grid inclusive again
o OTD 10027
Crash when trying to display results for model with point mass matrix elements
o OTD 10374 [Mesh Edit] Mesh refinement of triangluar element near hole gives warped elements
o OTD
9814 Whole Plate was not meshed at all when
partially split with two plates.
o OTD 10031 [Mesh Edit] Part of element also got removed by
"Remove Node" on membrane elements
o OTD 10130
Incongruent 2nd order mesh
o OTD 10400 GeniE crashes when run meshing after switch equipment
representing with mass
o OTD
9731 Unknown error, node does not exist
o OTD 9763 [Mesh Edit] GeniE
crashes when meshing during preview of MoveTriangle
operation.
o OTD
9813 Duplicated nodes created in partial
meshing. Regular mesher worked fine.
o OTD
9896 Crash (re)meshing (model) subset
o OTD
9533 Crashes when moving a triangle with
Element labels turned on.
o OTD 9619
Mesh result was wrong after import this GeniE js
o OTD
9676 RefineEdge
crashes.
o OTD 10358
One more connection point was created after move the beams and joint
o OTD 10375 [Mesh Edit] Mesh re-refinement does not work
when refining an element next to an already refined area
o OTD
6314 SuperElement
type is overridden without user definition
o OTD
6959 BeamTypes:
Doubled spring_2nodes element when two inner spring-type beam edges meet
o OTD
9429 BeamTypes: Partial
meshing of inner spring-type beams doesn't support partially overlapping outer
beams
o OTD
9620 Different mesh generated each time for
small frame model
o OTD
9667 Lack FEM file with top superelement type in partial mesher
o OTD 9779
Partial Meshing - changing footprint parameter for point moment is badly
handled
o OTD
9788 Meshing problems with partial mesher
o OTD
9849 Spring elements not created in update
mesh after copy outer beam
o OTD
9957 Fail to update point moment when
add/remove point moment by edit load property
o OTD 10151 [Mesh/Edit] Remove element: failed:
o OTD 9735 [Mesh Edit] Crash in label node number after
export FEM file in mesh edit mode
o OTD 10665 Applied
section/material of equipment fail to be updated in mesh
o OTD 10671
Fail to update mesh after edit equipment footprint when represent equipment as
footprint mass
o OTD
9050 EditMesh:
Error when moving nodes along plate edge
o OTD 9055 [Mesh Edit] Incorrect behavior when move node
along punch edge
o OTD 9059 [Mesh Edit] Preview not shown completely when
mesh edit on common edge of multiple faces
o OTD 9062 [Mesh Edit] Lack validation of move node after
remove element operation
o OTD
9123 BeamTypes:
spring_2nodes elements for spring-type inner beams do not get deleted when
outer beams get deleted
o OTD
9571 Partial Mesher:
Support edit local coordinate system of curved beam with eccentricity
o OTD10693 [partialmesher] Wrong orientation of element in partial mesher
o
Frame code checks
o OTD
7812 Cap End Forces Info wrt. code check General options not correct
o OTD
9661 Code check redesign not working in
some cases
o OTD
9928 Code check: AISC 2005 vs. 2010,
changes in the standard not taken into account
o OTD 10015
Error in joint Properties grid dialogue
o OTD 10083
Redesign tool scripts in wrong units when input unit different from db unit
o OTD 10138
Wrong fy is used in overlapping joint extra check
o OTD 10173
Intersection point error when creating capacity joint
o OTD 10175
Issue with manual assignment of gaps for KTK joints
o OTD 10553
Code check: Error in scripting member capacity options
Plate code checks
o OTD 10086
Code check dialogues, General tab, too much space below "headers"
compared to previous releases
o OTD
9692 CSRH - Buckling - Idealisation
Method displayed in dialogue is wrong
o OTD 10310
Can't add contour for Uf-VonMises results in View
Options
o OTD 10337
Wrong material and thickness data displayed in plate code check
o OTD10741
Coarse mesh yield check: when “specify shear correction factor directly”
opening data should be grey out
Reporting
o OTD 10107
Report title is not updated immediately after change report title in save
report dialog
o OTD 10214 GeniE crash when after generating reports when color coding
is active
o OTD 10230
Color coding of sections is incorrect in report with dynamic set
o OTD 10232
Incorrect uftot color coding in report
o OTD 10269
The graphics and figure name doesn't update until click
modify
o OTD 10388 Reporting
- adding graphics chapter and deleting analysis makes GeniE
crash
o OTD 10714
Add capacity check color coding categories to correct subFolder
o OTD 10315
Pull-down box of labels is empty in save report - graphics when set display to
mesh view
Wajac
import
o OTD 10187 Wajac import: Moment reference point converted with wrong
unit
FEM
Import
o OTD 10608 [Import Fem] Trying to import FEM file without
valid units will close dialog
SACS
Import
o OTD
9721 SACS import: In PSI import the P
factor should be multipled to P values.
o OTD 10106
SACS import: The unit change doesn't work for SACS wind areas
o OTD 10501
SACS import: Missing unit conversion for buckling length data
o OTD 10565
SACS PSI import - "YEXP Dia_ref": the scale
factor of the P data not correct
o OTD 10570
SACS PSI import: Consider the T factor defined in column 28-33 in SOIL TZAXIAL
line
o OTD 10594
SACS import: the converted g value for X or Y direction is not correct
XML & GNX Export /
Import
o OTD
7874 GeniE gives
error upon importing of XML file with æ, ø, å inside
o OTD
7944 GeniE 6.7-12
behaving strange with attached XML, crash upon saving
o OTD 9932
Repeated XML export-import causes support curves to disappear
o OTD 10449
Wrong unit qualifier for water_depth in XML
import/export
o OTD 10520
Improve performance when importing XML with panel code checks
In general, see the Status
List at www.dnvgl.com/software
The Status List is
continuously updated to inform the user about newly detected problems and
workarounds.