
Tension Compression load case The linear cases

1
 
 
 
 
 
                                 ******       ******       ******       ******      ** ***  ****
                                ********     ********     ********     ********     *************
                               **      **   **      **   **      **   **      **    **    **    **
                               **           **      **   **                   **    **    **    **
                                *******     **********    *******      *********    **    **    **
                                 *******    *********      *******    **********    **    **    **
                                       **   **                   **   **      **    **    **    **
                               **      **   **      **   **      **   **      **    **    **    **
                                ********     ********     ********     *********    **    **    **
                                 ******       ******       ******       ****** **   **    **    **
 
 
 
                               *******************************************************************
                               *******************************************************************
                               **                                                               **
                               **                                                               **
                               **      *****   *******   *****   *******  ******    *****       **
                               **     *     *  *        *     *     *     *     *  *     *      **
                               **     *        *        *           *     *     *  *     *      **
                               **      *****   *****     *****      *     ******   *******      **
                               **           *  *              *     *     *   *    *     *      **
                               **     *     *  *        *     *     *     *    *   *     *      **
                               **      *****   *******   *****      *     *     *  *     *      **
                               **                                                               **
                               **                                                               **
                               **               Superelement Structural Analysis                **
                               **                                                               **
                               **                                                               **
                               *******************************************************************
                               *******************************************************************
 
 
                                              Marketing and Support by DNV Software
 
 
 
               Program id   : D8.4-06                                          Computer         : 586
               Release date : 05-MAR-2012                                      Impl. update     :
               Access time  : 06-MAR-2012 16:01:17                             Operating system : Win NT 6.1 [7600]
               User id      : acd                                              CPU id           : 1018435640
                                                                               Installation     : , OSLLP110451
 
 
               Copyright DET NORSKE VERITAS AS, P.O.Box 300, N-1322 Hovik, Norway
 
 
               Library     Version    Impl.Upd   Release date
               ELLIBD      1.9-07                05-MAR-2012
               SIFTOOLD    8.3-07                05-MAR-2012
               NORSAMD     8.4-02                05-MAR-2012
               MFR         8.3-05                05-MAR-2012
               PRIMAS      5.3-04                05-MAR-2012
               AUXLIB      8.2-02                05-MAR-2012
               SESTRA_PRLL 8.1-02                05-MAR-2012

               Run identification   : None                                                                       
                                                                                                                 
                                                                                                                 

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     1
                                                                                                                                    
                                    DATA GENERATION MODULE                                                                          
                                                                                                                     SUB PAGE:     1
                                                                                                                                    
  PRINTOUT OF DATA GIVEN AS DIRECT INPUT TO SESTRA                                                                                  
                                                                                                                                    
   COMM                                                                                                                             
   COMM Made by NAnat script x600.build                                                                                             
   COMM                                                                                                                             
   INAM X600A                                                                                                                       
   LNAM X600A                                                                                                                       
   ITOP    1.   0.   0.   0.   0.   0.   0.   0.   0.  0.00E+00  0.00E+00  0.00E+00                                                 
   SOLM    0.   0.   0.   0.   0.   0.   0.   0.   0.  0.00E+00  0.00E+00  0.00E+00                                                 
   RETR    3.   2.   0.   0.   0.   0.   0.   0.   0.  0.00E+00  0.00E+00  0.00E+00                                                 
   RNAM X600A  SIN                                                                                                                  
   Z                                                                                                                                

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     2
                                                                                                                                    
                                    DATA GENERATION MODULE                                                                          
                                                                                                                     SUB PAGE:     2
  INTERPRETATION OF ANALYSIS CONTROL DATA                                                                                           
                                                                                                                                    
                                                                                                                                    
      Type of Analysis :                                                                                                            
 
         Reduction                                                                                                                  
         Multifront Solver is used                                                                                                  
         Retracking                                                                                                                 
 
         ANTYP = 0   Type of analysis is not specified.                                                                             
 
  *** WARNING *** ANTYP = 0 can cause unnecessary computation                                                                       
         (Give ANTYP = 1. for Static and Quasistatic Analysis and                                                                   
               ANTYP = 2. for Dynamic Analysis).                                                                                    
 
 
         The singularity constant for membrane and shell elements                                                                   
         CSING =  1.0000E-08                                                                                                        
 
         Lowest accepted condition number in reduction                                                                              
         EPSSOL=  1.1102E-14                                                                                                        
 
 
      Data types selected for storing on Results File :                                                                             
 
          - Input Interface File Records,                                                                                           
               except for input loads for twonoded beam elements                                                                    
               and                                                                                                                  
               except for input loads for other elements than twonoded elements,                                                    
          - displacements,  sequence:                                                                                               
               all nodes for the first resultcase, all nodes for the second resultcase, etc.                                        
          - forces and moments for beam, spring and layered shell elements,  sequence:                                              
               all elements for the first resultcase, all elements for the second resultcase, etc.                                  
          - stresses (not for beam or spring elements),  sequence:                                                                  
               all elements for the first resultcase, all elements for the second resultcase, etc.                                  
 
         (Can be redefined by RSEL for selected superelements, see below.)                                                          
         Storing is done for superelements specified in RETR command.                                                               

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     3
                                                                                                                                    
                                    DATA GENERATION MODULE                                                                          
                                                                                                                     SUB PAGE:     3
                                                                                                                                    
  INPUT INTERFACE FILES :                                                                                                           
                                                                                                                                    
                                                                                                                                    
     X600AT1.FEM                                                                                                                    
     X600AL1.FEM                                                                                                                    
 

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     4
                                                                                                                                    
                                    DATAGENERATION - SUPERELEMENT TYPE     1                                                        
                                                                                                                     SUB PAGE:     4
 
 
 
      For a summary of warnings for elements and more information                                                                   
      see *** SUMMARY OF WARNINGS FROM DATACHECK OF ELEMENTS ***                                                                    
 
  *** WARNING Element no.       1 has got mass density = 0.                                                                         
  *** WARNING Element no.       2 has got mass density = 0.                                                                         
  *** WARNING Element no.       3 has got mass density = 0.                                                                         
  *** WARNING Element no.       4 has got mass density = 0.                                                                         
  *** WARNING Element no.       5 has got mass density = 0.                                                                         
 
  *** WARNING Element no.       6 has got mass density = 0.                                                                         
  *** WARNING Element no.       7 has got mass density = 0.                                                                         
 
 
 
 
 
      *** SUMMARY OF DATA FROM INPUT AND LOAD INTERFACE FILES ***                                                                   
               FOR SUPERELEMENT TYPE       1  ON LEVEL  1                                                                           
 
      The superelement has                                                                                                          
                                                                                                                                    
             7  subelements                                                                                                         
             6  nodes                                                                                                               
            12  specified (fixed) degrees of freedom                                                                                
            24  internal (free) degrees of freedom                                                                                  
          totally                                                                                                                   
            36  degrees of freedom                                                                                                  
                                                                                                                                    
             1  loadcases                                                                                                           
                                                                                                                                    
                                                                                                                                    
      The following kinds of loads are given:                                                                                       
            node loads                                                                                                              
                                                                                                                                    
      The following basic elements are given:                                                                                       
             2  2 node truss elements        TESS                                                                                   
             5  2 node beam elements         BEAS                                                                                   
                                                                                                                                    

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     5
                                                                                                                                    
                                    DATAGENERATION - SUPERELEMENT TYPE     1                                                        
                                                                                                                     SUB PAGE:     5
                                                                                                                                    
      *** SUM OF LOADS AND MOMENTS FOR SUPERELEMENT TYPE     1  ON LEVEL  1  ***                                                    
                                                                                                                                    
     X-LOAD = SUM OF GIVEN LOADS IN GLOBAL X-DIRECTION                                                                              
     Y-LOAD = SUM OF GIVEN LOADS IN GLOBAL Y-DIRECTION                                                                              
     Z-LOAD = SUM OF GIVEN LOADS IN GLOBAL Z-DIRECTION                                                                              
     X-MOM  = SUM OF LOCAL MOMENTS ABOUT GLOBAL X-AXIS                                                                              
     Y-MOM  = SUM OF LOCAL MOMENTS ABOUT GLOBAL Y-AXIS                                                                              
     Z-MOM  = SUM OF LOCAL MOMENTS ABOUT GLOBAL Z-AXIS                                                                              
     X-RMOM = SUM OF MOMENTS ABOUT GLOBAL X-AXIS FROM GIVEN LOADS AND MOMENTS                                                       
     Y-RMOM = SUM OF MOMENTS ABOUT GLOBAL Y-AXIS FROM GIVEN LOADS AND MOMENTS                                                       
     Z-RMOM = SUM OF MOMENTS ABOUT GLOBAL Z-AXIS FROM GIVEN LOADS AND MOMENTS                                                       
                                                                                                                                    
      LOADCASE    X-LOAD      Y-LOAD      Z-LOAD      X-MOM       Y-MOM       Z-MOM      X-RMOM      Y-RMOM      Z-RMOM             
           1  1.0000E+01  0.0000E+00  0.0000E+00  0.0000E+00  0.0000E+00  0.0000E+00  0.0000E+00  2.0000E+01  0.0000E+00            

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     6
                                                                                                                                    
                                    DATAGENERATION - SUPERELEMENT TYPE     1                                                        
                                                                                                                     SUB PAGE:     6
                                                                                                                                    
  *** SUMMARY OF WARNINGS FROM DATACHECK OF ELEMENTS ***                                                                            
 
      There are      7  elements with mass density = 0.                                                                             
      Element mass, gravity and other inertia load will not be generated for these elements.                                        
 
          - COMPUTATION IS CONTINUED.                                                                                               
 
 
  *** Estimated size of stiffness matrix for superelement       1:         360 variables                                            
 
 
 
  *** Estimate of total size of stiffness matrices for new superelements:            360 variables                                  

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     7
                                                                                                                                    
                                    REDUCTION MODULE - SUPERELEMENT TYPE    1                                                       
                                                                                                                     SUB PAGE:     1
 
 
 
 
 
 
 
 
 
                                     - STIFFNESS FACTORIZATION PERFORMED BY MULTIFRONT EQUATION SOLVER -                            
 
                                     - LOAD SUBSTITUTION PERFORMED BY  MULTIFRONT EQUATION SOLVER -                                 

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     8
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     1
 ***********************************************************************************************************************************
 
 
                      00  0  0 00000 000  0  0 00000     0000 0   0 000  0     00  0   0  00  00000 0  00  0   0                    
                     0  0 0  0   0   0  0 0  0   0       0     0 0  0  0 0    0  0 00  0 0  0   0   0 0  0 00  0                    
                     0  0 0  0   0   000  0  0   0       000    0   000  0    0000 0 0 0 0000   0   0 0  0 0 0 0                    
                     0  0 0  0   0   0    0  0   0       0     0 0  0    0    0  0 0  00 0  0   0   0 0  0 0  00                    
                      00   00    0   0     00    0       0000 0   0 0    0000 0  0 0   0 0  0   0   0  00  0   0                    
 
 
 ***********************************************************************************************************************************
 
 
                                       000  00000  000   0000   000   000  0000   000                                               
                                      0       0    0  0  0     0     0     0     0                                                  
                                      0       0    0  0  0     0     0     0     0                                                  
                                       00     0    000   000    00    00   000    00                                                
                                         0    0    0  0  0        0     0  0        0                                               
                                         0    0    0  0  0        0     0  0        0                                               
                                      000     0    0  0  0000  000   000   0000  000                                                
 
 
 ***********************************************************************************************************************************
 
 
       ELTYP=3: Plane constant strain triangle              (CSTA)                                                                  
       ---------------------------------------                                                                                      
       Stress components are given at the center of gravity.                                                                        
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=9: Plane quadrilateral membrane element        (LQUA)                                                                  
       --------------------------------------------                                                                                 
       Stress components are given at five points within the element: the four corner nodes and the centroid of the element.        
       Stress point number one corresponds to local node number one, etc. Stress point number five is the centroid of the           
       element.                                                                                                                     
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=10: Truss element                              (TESS)                                                                  
       -----------------------                                                                                                      
       One axial stress component is given within the element.                                                                      
 
       The local cartesian coordinate system is defined by the sequence of node numbers given for the element. The first            
       node number is origo, the local x-axis goes through the following node.                                                      
 
 
 

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:     9
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     2
       ELTYP=15: Straight beam with 2 nodes                 (BEAS)                                                                  
       ------------------------------------                                                                                         
       Forces are referred to the local coordinate system. Positive axial forces are tensile forces. Positive moments               
       induce tension on negative side. Positive shear rotates an isolated piece counter-clockwise when                             
       seen in positive Y- or Z-direction (local axes).                                                                             
 
 
 
       ELTYP=20: Isoparametric hexahedron with 20 nodes     (IHEX)                                                                  
       ------------------------------------------------                                                                             
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are two stress points in each coordinate direction.                                                
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=21: Isoparametric hexahedron with 8 nodes      (LHEX)                                                                  
       -----------------------------------------------                                                                              
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are two stress points in each coordinate direction.                                                
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=23: Curved beam with 3 nodes                   (BTSS)                                                                  
       ----------------------------------                                                                                           
       Forces and moments are given at two gaussian integration points.                                                             
 
       Forces are referred to the local coordinate system. Positive axial forces are tensile forces. Positive moments               
       induce tension on negative side. Positive shear rotates an isolated piece counter-clockwise when                             
       seen in positive Y- or Z-direction (local axes).                                                                             
 
 
 
       ELTYP=24: Quadrilateral flat shell with four nodes   (FQUS)                                                                  
       --------------------------------------------------                                                                           
       Stress components are given at ten points within the element by default: at upper and lower side of the shell at             
       the four corner nodes and the centroid.                                                                                      
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=25: Triangular flat shell with three nodes     (FTRS)                                                                  
       ------------------------------------------------                                                                             
       Stress components are given at eight points within the element by default: at upper and lower side of the shell at           
       the three corner nodes and the centroid.                                                                                     
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    10
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     3
 
 
       ELTYP=26: Subparametric curved triangular shell      (SCTS)                                                                  
       -----------------------------------------------                                                                              
       Stress components are given at two points within the element by default. The coordinates of these points are                 
       given as the centroid of the triangular center-plane and the two gaussian integration points in the thickness                
       direction.                                                                                                                   
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the shell and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=28: Subparametric curved quadrilateral shell   (SCQS)                                                                  
       --------------------------------------------------                                                                           
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are two stress points in each coordinate direction.                                                
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the shell and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=30: Isoparametric prism with 15 nodes          (IPRI)                                                                  
       -------------------------------------------                                                                                  
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are four stress points in two triangular planes.                                                   
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=31: Isoparametric tetrahedron with 10 nodes    (ITET)                                                                  
       -------------------------------------------------                                                                            
       Stress components are given at four points within the element by default. These points are the gaussian                      
       integration points.                                                                                                          
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=32: Triangular prism with 6 nodes              (TPRI)                                                                  
       ---------------------------------------                                                                                      
       Stress components are given at two points within the element by default. These points are the gaussian                       
       integration points.                                                                                                          
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=33: Tetrahedron with 4 nodes                   (TETR)                                                                  
       -----------------------------------                                                                                          
       Stress components are given at one point within the element by default. This is the centroid of the element.                 
 

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    11
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     4
       The stress components are referred to the globalcartesian coordinate system.                                                 
 
 
 
       ELTYP = 36, 37 and 38:                                  (TRSI)                                                               
 
       Solid-shell transition elements with 18, 15 and 12 nodes                                                                     
       --------------------------------------------------------                                                                     
       Stress components are given at eight points within the element by default. These points are gaussian integration             
       points. There are two stress points in each coordinate direction.                                                            
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=59: Triangular flat shell with drilling, 3 nodes  (FTAS)                                                               
       ------------------------------------------------------                                                                       
       Stress components are given at eight points within the element by default: at upper and lower side of the shell at           
       the three corner nodes and the centroid.                                                                                     
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=60: Quadrilateral flat shell with drilling, 4 nod (FQAS)                                                               
       -------------------------------------------------------                                                                      
       Stress components are given at ten points within the element by default: at upper and lower side of the shell at             
       the four corner nodes and the centroid.                                                                                      
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    12
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     5
                          000  0000  000 0 000  0  0  00  0       0000  00  000   000 0000  000                                     
                          0  0 0    0    0 0  0 0  0 0  0 0       0    0  0 0  0 0    0    0                                        
                          000  000   00  0 0  0 0  0 0000 0       000  0  0 000  0    000   00                                      
                          0 0  0       0 0 0  0 0  0 0  0 0       0    0  0 0 0  0    0       0                                     
                          0  0 0000 000  0 000   00  0  0 0000    0     00  0  0  000 0000 000                                      
 
 
 ***********************************************************************************************************************************
 
 
 Succeding the retracking, residual forces are computed and checked. The residual forces are the difference between                 
 internal forces (due to the displacement field and distributed loads on the basic elements) and external forces (due               
 to concentrated loads applied).                                                                                                    
 
 For each built element (also the structure itself) the residual force matrix is computed for the internal degrees of freedom.      
 The euclidian norm of the residual forces is computed and divided by the euclidian norm of a reference vector.                     
 This gives a neutral measure on the residual force.                                                                                

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    13
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     6
 
 
 
      Results file name: X600AR1.SIN                                                                                                

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    14
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:     7
                                                                                                                                    
  DISPLACEMENTS                                                                                                                     
  THE COORDINATE SYSTEM OF THE ACTUAL SUPERELEMENT IS USED, EXCEPT WHEN NODAL TRANSFORMATIONS ARE SPECIFIED.                        
  FOR NODES WITH TRANSFORMATIONS THE LOCAL SYSTEMS ARE USED. THE 3x3 TRANSFORMATION MATRICES ARE PRINTED.                           
  **********************************************************************************************************                        
                                                                                                                                    
     NODE      CARTESIAN COORDINATES              NODAL DISPLACEMENTS                                                               
      NO.        X          Y          Z         DX           DY           DZ           RX           RY           RZ                
                                                                                                                                    
        1    0.000E+00  0.000E+00  0.000E+00                                                                                        
                        LOADCASE    1       0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00            
        2    0.000E+00  0.000E+00  1.000E+00                                                                                        
                        LOADCASE    1       6.91986E-07  1.07116E-21  8.36946E-09 -1.80934E-21  5.77408E-07 -8.99987E-23            
        3    0.000E+00  0.000E+00  2.000E+00                                                                                        
                        LOADCASE    1       7.47233E-07  3.34649E-21  1.67389E-08 -2.49909E-21 -6.79318E-08 -1.79997E-22            
        4    1.000E+00  0.000E+00  2.000E+00                                                                                        
                        LOADCASE    1       7.54794E-07  3.15495E-21 -7.68152E-09 -2.48348E-21 -6.66772E-08 -1.79997E-22            
        5    1.000E+00  0.000E+00  1.000E+00                                                                                        
                        LOADCASE    1       6.96507E-07  1.03871E-21 -8.36946E-09 -1.75600E-21  5.82765E-07 -8.99987E-23            
        6    1.000E+00  0.000E+00  0.000E+00                                                                                        
                        LOADCASE    1       0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00            

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    15
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:     8
                                                                                                                                    
  REACTION FORCES IN NODES WITH SPECIFIED (FIXED) DEGREES OF FREEDOM.                                                               
  NODES MARKED WITH AN ASTERISK (*) TO THE RIGHT HAVE A LOCAL COORDINATE SYSTEM.                                                    
  ******************************************************************************                                                    
                                                                                                                                    
  LOADCASE (INDEX) NODE NO.      X             Y             Z            RX            RY            RZ                            
 
        1              1  -4.98861E+00  -1.68395E-15  -1.38041E+01   2.63988E-15  -3.08952E+00   7.13644E-17                        
                       6  -5.01139E+00  -2.36534E-15   1.38041E+01   3.06066E-15  -3.10643E+00   7.13644E-17                        

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    16
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:     9
                                                                                                                                    
  SUM OF REACTION FORCES FROM SPECIFIED DEGREES OF FREEDOM.                                                                         
  THE FORCES AND MOMENTS ARE REFFERED TO THE COORDINATE SYSTEM OF THE ACTUAL SUPERELEMENT.                                          
  ****************************************************************************************                                          
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1           -1.0000E+01   -4.0493E-15    1.7764E-15    5.7005E-15   -2.0000E+01   -2.2226E-15                               

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    17
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:    10
                                                                                                                                    
       STRESSES IN THE BASIC ELEMENTS (FORCES IF BEAM ELEMENTS BEAS)                                                                
       SIGX IS FOR SHELLS AND MEMBRANES REFERRED TO THE PROJECTION ON THE ELEMENT PLANE OF THE SUPERELEMENT                         
       X-AXIS BY DEFAULT OR OF A USERDEFINED VECTOR IF GIVEN (TRANSF=0). PROBLEM ELEMENTS ARE LISTED BELOW.                         
       ****************************************************************************************************                         
                                                                                                                                    
                                CARTESIAN COORDINATES            STRESS COMPONENTS (FORCES IF BEAS ELEMENTS)                        
                                                                                                                                    
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       1      1      1   0.000E+00  0.000E+00  0.000E+00  1.380E+01 -4.151E+00  2.767E+00 -7.136E-17  1.714E+00  2.571E+00     BEAS 
       1      1      2                                    1.380E+01 -4.151E+00  2.767E+00 -7.136E-17  3.302E-01  4.952E-01     BEAS 
       1      1      3   0.000E+00  0.000E+00  1.000E+00  1.380E+01 -4.151E+00  2.767E+00 -7.136E-17 -1.053E+00 -1.580E+00     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       2      1      1   0.000E+00  0.000E+00  1.000E+00  1.380E+01  2.053E+00 -1.369E+00 -7.136E-17 -1.053E+00 -1.580E+00     BEAS 
       2      1      2                                    1.380E+01  2.053E+00 -1.369E+00 -7.136E-17 -3.690E-01 -5.535E-01     BEAS 
       2      1      3   0.000E+00  0.000E+00  2.000E+00  1.380E+01  2.053E+00 -1.369E+00 -7.136E-17  3.154E-01  4.731E-01     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       3      1      1   0.000E+00  0.000E+00  2.000E+00  1.247E+01 -9.150E-01 -6.710E-01  1.238E-17 -3.363E-01  4.585E-01     BEAS 
       3      1      2                                    1.247E+01 -9.150E-01 -6.710E-01  1.238E-17 -7.648E-04  1.043E-03     BEAS 
       3      1      3   1.000E+00  0.000E+00  2.000E+00  1.247E+01 -9.150E-01 -6.710E-01  1.238E-17  3.347E-01 -4.564E-01     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       4      1      1   1.000E+00  0.000E+00  2.000E+00  1.135E+00  2.056E+00  1.371E+00 -7.136E-17  3.140E-01 -4.710E-01     BEAS 
       4      1      2                                    1.135E+00  2.056E+00  1.371E+00 -7.136E-17 -3.714E-01  5.570E-01     BEAS 
       4      1      3   1.000E+00  0.000E+00  1.000E+00  1.135E+00  2.056E+00  1.371E+00 -7.136E-17 -1.057E+00  1.585E+00     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       5      1      1   1.000E+00  0.000E+00  1.000E+00 -1.380E+01 -4.170E+00 -2.780E+00 -7.136E-17 -1.057E+00  1.585E+00     BEAS 
       5      1      2                                   -1.380E+01 -4.170E+00 -2.780E+00 -7.136E-17  3.332E-01 -4.998E-01     BEAS 
       5      1      3   1.000E+00  0.000E+00  0.000E+00 -1.380E+01 -4.170E+00 -2.780E+00 -7.136E-17  1.723E+00 -2.585E+00     BEAS 
  ELEMENT LOADCASE POINT    X          Y          Z         SIGX                                                                    
       6      1      1   5.000E-01  0.000E+00  1.500E+00  -2.690E+03                                                         TESS   
  ELEMENT LOADCASE POINT    X          Y          Z         SIGX                                                                    
       7      1      1   5.000E-01  0.000E+00  1.000E+00   9.494E+02                                                         TESS   
 
      Mass sum is missing                                                                                                           
 
 
 
 SUPERELEMENT TYPE:     1 ACTUAL ELEMENT:     1                                                                                     
 HAS BEEN STORED ON RESULT FILE                                                                                                     

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    18
                                                                                                                                    
                                        RETRACKING MODULE - GLOBAL DATA                                                             
                                                                                                                     SUB PAGE:     1
                                                                                                                                    
  SUM OF GLOBAL LOADS AND MOMENTS                                                                                                   
  *******************************                                                                                                   
                                                                                                                                    
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1            1.0000E+01    0.0000E+00    0.0000E+00    0.0000E+00    2.0000E+01    0.0000E+00                               

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    19
                                                                                                                                    
                                        RETRACKING MODULE - GLOBAL DATA                                                             
                                                                                                                     SUB PAGE:     2
                                                                                                                                    
  SUM OF REACTION FORCES AND MOMENTS                                                                                                
  **********************************                                                                                                
  GIVEN IN THE GLOBAL COORDINATE SYSTEM OF THE TOP LEVEL SUPERELEMENT                                                               
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1           -1.0000E+01   -4.0493E-15    1.7764E-15    5.7005E-15   -2.0000E+01   -2.2226E-15                               

 DATE: 06-MAR-2012 TIME: 16:01:18   ***************  SESTRA  ***************                                             PAGE:    20
                                                                                                                                    
                                        RETRACKING MODULE - GLOBAL DATA                                                             
                                                                                                                     SUB PAGE:     3
                                                                                                                                    
  DIFFERENCES BETWEEN SUMMED LOADS AND REACTION FORCES                                                                              
  ****************************************************                                                                              
  LARGER THAN   0.00E+00 FOR TRANSLATIONAL COMPONENTS AND LARGER THAN   0.00E+00 FOR ROTATIONAL COMPONENTS                          
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1            3.0909E-13   -4.0493E-15    1.7764E-15    5.7005E-15    4.1922E-13   -2.2226E-15                               
 
  TOTAL TIME CONSUMED IN SESTRA                    CPU TIME:      0.50  CLOCK TIME:      0.53  CHANNEL TIME:      0.00              

Tension Compression load case 2

1
 
 
 
 
 
                                 ******       ******       ******       ******      ** ***  ****
                                ********     ********     ********     ********     *************
                               **      **   **      **   **      **   **      **    **    **    **
                               **           **      **   **                   **    **    **    **
                                *******     **********    *******      *********    **    **    **
                                 *******    *********      *******    **********    **    **    **
                                       **   **                   **   **      **    **    **    **
                               **      **   **      **   **      **   **      **    **    **    **
                                ********     ********     ********     *********    **    **    **
                                 ******       ******       ******       ****** **   **    **    **
 
 
 
                               *******************************************************************
                               *******************************************************************
                               **                                                               **
                               **                                                               **
                               **      *****   *******   *****   *******  ******    *****       **
                               **     *     *  *        *     *     *     *     *  *     *      **
                               **     *        *        *           *     *     *  *     *      **
                               **      *****   *****     *****      *     ******   *******      **
                               **           *  *              *     *     *   *    *     *      **
                               **     *     *  *        *     *     *     *    *   *     *      **
                               **      *****   *******   *****      *     *     *  *     *      **
                               **                                                               **
                               **                                                               **
                               **               Superelement Structural Analysis                **
                               **                                                               **
                               **                                                               **
                               *******************************************************************
                               *******************************************************************
 
 
                                              Marketing and Support by DNV Software
 
 
 
               Program id   : 8.4-05                                           Computer         : 8664
               Release date : 13-JUL-2011                                      Impl. update     :
               Access time  : 06-MAR-2012 16:01:28                             Operating system : Win NT 6.1 [7600]
               User id      : acd                                              CPU id           : 1018435640
                                                                               Installation     : , OSLLP110451
 
 
               Copyright DET NORSKE VERITAS AS, P.O.Box 300, N-1322 Hovik, Norway
 
 
               Library     Version    Impl.Upd   Release date
               ELLIB       1.9-07     Debug      12-JUL-2011
               SIFTOOL     8.3-07     Debug      12-JUL-2011
               NORSAM      8.4-02     Debug      12-JUL-2011
               MFR         8.3-05     Debug      12-JUL-2011
               PRIMAS      5.3-04     Debug      12-JUL-2011
               AUXLIB      8.2-02     Debug      12-JUL-2011
               SESTRA_PRLL 8.1-02                12-JUL-2011

               Run identification   : None                                                                       
                                                                                                                 
                                                                                                                 

 DATE: 06-MAR-2012 TIME: 16:01:32   ***************  SESTRA  ***************                                             PAGE:     1
                                                                                                                                    
                                    DATA GENERATION MODULE                                                                          
                                                                                                                     SUB PAGE:     1
                                                                                                                                    
  PRINTOUT OF DATA GIVEN AS DIRECT INPUT TO SESTRA                                                                                  
                                                                                                                                    
   COMM                                                                                                                             
   COMM Made by NAnat script x600.build                                                                                             
   COMM                                                                                                                             
   INAM tmp_X600A                                                                                                                   
   LNAM X600A                                                                                                                       
   ITOP    1.   0.   0.   0.   0.   0.   0.   0.   0.  0.00E+00  0.00E+00  0.00E+00                                                 
   SOLM    0.   0.   0.   0.   0.   0.   0.   0.   0.  0.00E+00  0.00E+00  0.00E+00                                                 
   RETR    3.   2.   0.   0.   0.   0.   0.   0.   0.  0.00E+00  0.00E+00  0.00E+00                                                 
   RNAM X600A  SIN                                                                                                                  
   Z                                                                                                                                

 DATE: 06-MAR-2012 TIME: 16:01:32   ***************  SESTRA  ***************                                             PAGE:     2
                                                                                                                                    
                                    DATA GENERATION MODULE                                                                          
                                                                                                                     SUB PAGE:     2
  INTERPRETATION OF ANALYSIS CONTROL DATA                                                                                           
                                                                                                                                    
                                                                                                                                    
      Type of Analysis :                                                                                                            
 
         Reduction                                                                                                                  
         Multifront Solver is used                                                                                                  
         Retracking                                                                                                                 
 
         ANTYP = 0   Type of analysis is not specified.                                                                             
 
  *** WARNING *** ANTYP = 0 can cause unnecessary computation                                                                       
         (Give ANTYP = 1. for Static and Quasistatic Analysis and                                                                   
               ANTYP = 2. for Dynamic Analysis).                                                                                    
 
 
         The singularity constant for membrane and shell elements                                                                   
         CSING =  1.0000E-08                                                                                                        
 
         Lowest accepted condition number in reduction                                                                              
         EPSSOL=  1.1102E-14                                                                                                        
 
 
      Data types selected for storing on Results File :                                                                             
 
          - Input Interface File Records,                                                                                           
               except for input loads for twonoded beam elements                                                                    
               and                                                                                                                  
               except for input loads for other elements than twonoded elements,                                                    
          - displacements,  sequence:                                                                                               
               all nodes for the first resultcase, all nodes for the second resultcase, etc.                                        
          - forces and moments for beam, spring and layered shell elements,  sequence:                                              
               all elements for the first resultcase, all elements for the second resultcase, etc.                                  
          - stresses (not for beam or spring elements),  sequence:                                                                  
               all elements for the first resultcase, all elements for the second resultcase, etc.                                  
 
         (Can be redefined by RSEL for selected superelements, see below.)                                                          
         Storing is done for superelements specified in RETR command.                                                               

 DATE: 06-MAR-2012 TIME: 16:01:32   ***************  SESTRA  ***************                                             PAGE:     3
                                                                                                                                    
                                    DATA GENERATION MODULE                                                                          
                                                                                                                     SUB PAGE:     3
                                                                                                                                    
  INPUT INTERFACE FILES :                                                                                                           
                                                                                                                                    
                                                                                                                                    
     tmp_X600AT1.FEM                                                                                                                
     X600AL1.FEM                                                                                                                    
 

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:     4
                                                                                                                                    
                                    DATAGENERATION - SUPERELEMENT TYPE     1                                                        
                                                                                                                     SUB PAGE:     4
 
 
 
      For a summary of warnings for elements and more information                                                                   
      see *** SUMMARY OF WARNINGS FROM DATACHECK OF ELEMENTS ***                                                                    
 
  *** WARNING Element no.       1 has got mass density = 0.                                                                         
  *** WARNING Element no.       2 has got mass density = 0.                                                                         
  *** WARNING Element no.       3 has got mass density = 0.                                                                         
  *** WARNING Element no.       4 has got mass density = 0.                                                                         
  *** WARNING Element no.       5 has got mass density = 0.                                                                         
 
  *** WARNING Element no.       6 has got mass density = 0.                                                                         
  *** WARNING Element no.       7 has got mass density = 0.                                                                         
 
 
 
 
 
      *** SUMMARY OF DATA FROM INPUT AND LOAD INTERFACE FILES ***                                                                   
               FOR SUPERELEMENT TYPE       1  ON LEVEL  1                                                                           
 
      The superelement has                                                                                                          
                                                                                                                                    
             7  subelements                                                                                                         
             6  nodes                                                                                                               
            12  specified (fixed) degrees of freedom                                                                                
            24  internal (free) degrees of freedom                                                                                  
          totally                                                                                                                   
            36  degrees of freedom                                                                                                  
                                                                                                                                    
             1  loadcases                                                                                                           
                                                                                                                                    
                                                                                                                                    
      The following kinds of loads are given:                                                                                       
            node loads                                                                                                              
                                                                                                                                    
      The following basic elements are given:                                                                                       
             2  2 node truss elements        TESS                                                                                   
             5  2 node beam elements         BEAS                                                                                   
                                                                                                                                    

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:     5
                                                                                                                                    
                                    DATAGENERATION - SUPERELEMENT TYPE     1                                                        
                                                                                                                     SUB PAGE:     5
                                                                                                                                    
      *** SUM OF LOADS AND MOMENTS FOR SUPERELEMENT TYPE     1  ON LEVEL  1  ***                                                    
                                                                                                                                    
     X-LOAD = SUM OF GIVEN LOADS IN GLOBAL X-DIRECTION                                                                              
     Y-LOAD = SUM OF GIVEN LOADS IN GLOBAL Y-DIRECTION                                                                              
     Z-LOAD = SUM OF GIVEN LOADS IN GLOBAL Z-DIRECTION                                                                              
     X-MOM  = SUM OF LOCAL MOMENTS ABOUT GLOBAL X-AXIS                                                                              
     Y-MOM  = SUM OF LOCAL MOMENTS ABOUT GLOBAL Y-AXIS                                                                              
     Z-MOM  = SUM OF LOCAL MOMENTS ABOUT GLOBAL Z-AXIS                                                                              
     X-RMOM = SUM OF MOMENTS ABOUT GLOBAL X-AXIS FROM GIVEN LOADS AND MOMENTS                                                       
     Y-RMOM = SUM OF MOMENTS ABOUT GLOBAL Y-AXIS FROM GIVEN LOADS AND MOMENTS                                                       
     Z-RMOM = SUM OF MOMENTS ABOUT GLOBAL Z-AXIS FROM GIVEN LOADS AND MOMENTS                                                       
                                                                                                                                    
      LOADCASE    X-LOAD      Y-LOAD      Z-LOAD      X-MOM       Y-MOM       Z-MOM      X-RMOM      Y-RMOM      Z-RMOM             
           1  1.0000E+01  0.0000E+00  0.0000E+00  0.0000E+00  0.0000E+00  0.0000E+00  0.0000E+00  2.0000E+01  0.0000E+00            

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:     6
                                                                                                                                    
                                    DATAGENERATION - SUPERELEMENT TYPE     1                                                        
                                                                                                                     SUB PAGE:     6
                                                                                                                                    
  *** SUMMARY OF WARNINGS FROM DATACHECK OF ELEMENTS ***                                                                            
 
      There are      7  elements with mass density = 0.                                                                             
      Element mass, gravity and other inertia load will not be generated for these elements.                                        
 
          - COMPUTATION IS CONTINUED.                                                                                               
 
 
  *** Estimated size of stiffness matrix for superelement       1:         360 variables                                            
 
 
 
  *** Estimate of total size of stiffness matrices for new superelements:            360 variables                                  

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:     7
                                                                                                                                    
                                    REDUCTION MODULE - SUPERELEMENT TYPE    1                                                       
                                                                                                                     SUB PAGE:     1
 
 
 
 
 
 
 
 
 
                                     - STIFFNESS FACTORIZATION PERFORMED BY MULTIFRONT EQUATION SOLVER -                            
 
                                     - LOAD SUBSTITUTION PERFORMED BY  MULTIFRONT EQUATION SOLVER -                                 

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:     8
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     1
 ***********************************************************************************************************************************
 
 
                      00  0  0 00000 000  0  0 00000     0000 0   0 000  0     00  0   0  00  00000 0  00  0   0                    
                     0  0 0  0   0   0  0 0  0   0       0     0 0  0  0 0    0  0 00  0 0  0   0   0 0  0 00  0                    
                     0  0 0  0   0   000  0  0   0       000    0   000  0    0000 0 0 0 0000   0   0 0  0 0 0 0                    
                     0  0 0  0   0   0    0  0   0       0     0 0  0    0    0  0 0  00 0  0   0   0 0  0 0  00                    
                      00   00    0   0     00    0       0000 0   0 0    0000 0  0 0   0 0  0   0   0  00  0   0                    
 
 
 ***********************************************************************************************************************************
 
 
                                       000  00000  000   0000   000   000  0000   000                                               
                                      0       0    0  0  0     0     0     0     0                                                  
                                      0       0    0  0  0     0     0     0     0                                                  
                                       00     0    000   000    00    00   000    00                                                
                                         0    0    0  0  0        0     0  0        0                                               
                                         0    0    0  0  0        0     0  0        0                                               
                                      000     0    0  0  0000  000   000   0000  000                                                
 
 
 ***********************************************************************************************************************************
 
 
       ELTYP=3: Plane constant strain triangle              (CSTA)                                                                  
       ---------------------------------------                                                                                      
       Stress components are given at the center of gravity.                                                                        
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=9: Plane quadrilateral membrane element        (LQUA)                                                                  
       --------------------------------------------                                                                                 
       Stress components are given at five points within the element: the four corner nodes and the centroid of the element.        
       Stress point number one corresponds to local node number one, etc. Stress point number five is the centroid of the           
       element.                                                                                                                     
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=10: Truss element                              (TESS)                                                                  
       -----------------------                                                                                                      
       One axial stress component is given within the element.                                                                      
 
       The local cartesian coordinate system is defined by the sequence of node numbers given for the element. The first            
       node number is origo, the local x-axis goes through the following node.                                                      
 
 
 

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:     9
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     2
       ELTYP=15: Straight beam with 2 nodes                 (BEAS)                                                                  
       ------------------------------------                                                                                         
       Forces are referred to the local coordinate system. Positive axial forces are tensile forces. Positive moments               
       induce tension on negative side. Positive shear rotates an isolated piece counter-clockwise when                             
       seen in positive Y- or Z-direction (local axes).                                                                             
 
 
 
       ELTYP=20: Isoparametric hexahedron with 20 nodes     (IHEX)                                                                  
       ------------------------------------------------                                                                             
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are two stress points in each coordinate direction.                                                
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=21: Isoparametric hexahedron with 8 nodes      (LHEX)                                                                  
       -----------------------------------------------                                                                              
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are two stress points in each coordinate direction.                                                
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=23: Curved beam with 3 nodes                   (BTSS)                                                                  
       ----------------------------------                                                                                           
       Forces and moments are given at two gaussian integration points.                                                             
 
       Forces are referred to the local coordinate system. Positive axial forces are tensile forces. Positive moments               
       induce tension on negative side. Positive shear rotates an isolated piece counter-clockwise when                             
       seen in positive Y- or Z-direction (local axes).                                                                             
 
 
 
       ELTYP=24: Quadrilateral flat shell with four nodes   (FQUS)                                                                  
       --------------------------------------------------                                                                           
       Stress components are given at ten points within the element by default: at upper and lower side of the shell at             
       the four corner nodes and the centroid.                                                                                      
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=25: Triangular flat shell with three nodes     (FTRS)                                                                  
       ------------------------------------------------                                                                             
       Stress components are given at eight points within the element by default: at upper and lower side of the shell at           
       the three corner nodes and the centroid.                                                                                     
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    10
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     3
 
 
       ELTYP=26: Subparametric curved triangular shell      (SCTS)                                                                  
       -----------------------------------------------                                                                              
       Stress components are given at two points within the element by default. The coordinates of these points are                 
       given as the centroid of the triangular center-plane and the two gaussian integration points in the thickness                
       direction.                                                                                                                   
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the shell and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=28: Subparametric curved quadrilateral shell   (SCQS)                                                                  
       --------------------------------------------------                                                                           
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are two stress points in each coordinate direction.                                                
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the shell and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=30: Isoparametric prism with 15 nodes          (IPRI)                                                                  
       -------------------------------------------                                                                                  
       Stress components are given at eight points within the element by default. These points are the gaussian                     
       integration points. There are four stress points in two triangular planes.                                                   
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=31: Isoparametric tetrahedron with 10 nodes    (ITET)                                                                  
       -------------------------------------------------                                                                            
       Stress components are given at four points within the element by default. These points are the gaussian                      
       integration points.                                                                                                          
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=32: Triangular prism with 6 nodes              (TPRI)                                                                  
       ---------------------------------------                                                                                      
       Stress components are given at two points within the element by default. These points are the gaussian                       
       integration points.                                                                                                          
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=33: Tetrahedron with 4 nodes                   (TETR)                                                                  
       -----------------------------------                                                                                          
       Stress components are given at one point within the element by default. This is the centroid of the element.                 
 

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    11
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     4
       The stress components are referred to the globalcartesian coordinate system.                                                 
 
 
 
       ELTYP = 36, 37 and 38:                                  (TRSI)                                                               
 
       Solid-shell transition elements with 18, 15 and 12 nodes                                                                     
       --------------------------------------------------------                                                                     
       Stress components are given at eight points within the element by default. These points are gaussian integration             
       points. There are two stress points in each coordinate direction.                                                            
 
       The stress components are referred to the global cartesian coordinate system.                                                
 
 
 
       ELTYP=59: Triangular flat shell with drilling, 3 nodes  (FTAS)                                                               
       ------------------------------------------------------                                                                       
       Stress components are given at eight points within the element by default: at upper and lower side of the shell at           
       the three corner nodes and the centroid.                                                                                     
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    
 
 
 
       ELTYP=60: Quadrilateral flat shell with drilling, 4 nod (FQAS)                                                               
       -------------------------------------------------------                                                                      
       Stress components are given at ten points within the element by default: at upper and lower side of the shell at             
       the four corner nodes and the centroid.                                                                                      
 
       The stress components are referred to a cartesian coordinate system with local z-axis normal to the plate and                
       local x-axis defined by projection of the global x-axis onto the element.                                                    

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    12
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     5
                          000  0000  000 0 000  0  0  00  0       0000  00  000   000 0000  000                                     
                          0  0 0    0    0 0  0 0  0 0  0 0       0    0  0 0  0 0    0    0                                        
                          000  000   00  0 0  0 0  0 0000 0       000  0  0 000  0    000   00                                      
                          0 0  0       0 0 0  0 0  0 0  0 0       0    0  0 0 0  0    0       0                                     
                          0  0 0000 000  0 000   00  0  0 0000    0     00  0  0  000 0000 000                                      
 
 
 ***********************************************************************************************************************************
 
 
 Succeding the retracking, residual forces are computed and checked. The residual forces are the difference between                 
 internal forces (due to the displacement field and distributed loads on the basic elements) and external forces (due               
 to concentrated loads applied).                                                                                                    
 
 For each built element (also the structure itself) the residual force matrix is computed for the internal degrees of freedom.      
 The euclidian norm of the residual forces is computed and divided by the euclidian norm of a reference vector.                     
 This gives a neutral measure on the residual force.                                                                                

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    13
                                                                                                                                    
                                    RETRACKING MODULE                                                                               
                                                                                                                     SUB PAGE:     6
 
 
 
      Results file name: X600AR1.SIN                                                                                                

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    14
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:     7
                                                                                                                                    
  DISPLACEMENTS                                                                                                                     
  THE COORDINATE SYSTEM OF THE ACTUAL SUPERELEMENT IS USED, EXCEPT WHEN NODAL TRANSFORMATIONS ARE SPECIFIED.                        
  FOR NODES WITH TRANSFORMATIONS THE LOCAL SYSTEMS ARE USED. THE 3x3 TRANSFORMATION MATRICES ARE PRINTED.                           
  **********************************************************************************************************                        
                                                                                                                                    
     NODE      CARTESIAN COORDINATES              NODAL DISPLACEMENTS                                                               
      NO.        X          Y          Z         DX           DY           DZ           RX           RY           RZ                
                                                                                                                                    
        1    0.000E+00  0.000E+00  0.000E+00                                                                                        
                        LOADCASE    1       0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00            
        2    0.000E+00  0.000E+00  1.000E+00                                                                                        
                        LOADCASE    1       1.80852E-06  3.85562E-21  5.58377E-09 -6.68554E-21  2.80781E-06 -1.03685E-23            
        3    0.000E+00  0.000E+00  2.000E+00                                                                                        
                        LOADCASE    1       3.99895E-06  1.28140E-20  1.11675E-08 -1.02056E-20  7.65603E-07 -2.07370E-23            
        4    1.000E+00  0.000E+00  2.000E+00                                                                                        
                        LOADCASE    1       4.00198E-06  1.27919E-20 -1.11675E-08 -1.01327E-20  7.68073E-07 -2.07370E-23            
        5    1.000E+00  0.000E+00  1.000E+00                                                                                        
                        LOADCASE    1       1.80852E-06  4.13514E-21 -5.58377E-09 -7.11726E-21  2.80946E-06 -1.03685E-23            
        6    1.000E+00  0.000E+00  0.000E+00                                                                                        
                        LOADCASE    1       0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00  0.00000E+00            

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    15
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:     8
                                                                                                                                    
  REACTION FORCES IN NODES WITH SPECIFIED (FIXED) DEGREES OF FREEDOM.                                                               
  NODES MARKED WITH AN ASTERISK (*) TO THE RIGHT HAVE A LOCAL COORDINATE SYSTEM.                                                    
  ******************************************************************************                                                    
                                                                                                                                    
  LOADCASE (INDEX) NODE NO.      X             Y             Z            RX            RY            RZ                            
 
        1              1  -5.00507E+00  -5.96716E-15  -9.20952E+00   9.54840E-15  -5.39693E+00   8.22168E-18                        
                       6  -4.99493E+00  -7.50750E-15   9.20952E+00   1.14175E-14  -5.39356E+00   8.22168E-18                        

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    16
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:     9
                                                                                                                                    
  SUM OF REACTION FORCES FROM SPECIFIED DEGREES OF FREEDOM.                                                                         
  THE FORCES AND MOMENTS ARE REFFERED TO THE COORDINATE SYSTEM OF THE ACTUAL SUPERELEMENT.                                          
  ****************************************************************************************                                          
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1           -1.0000E+01   -1.3475E-14   -1.7764E-15    2.0966E-14   -2.0000E+01   -7.4911E-15                               

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    17
                                                                                                                                    
                                    RETRACKING MODULE - SUPERELEMENT TYPE    1                                                      
                                    THE STRUCTURE                                                                    SUB PAGE:    10
                                                                                                                                    
       STRESSES IN THE BASIC ELEMENTS (FORCES IF BEAM ELEMENTS BEAS)                                                                
       SIGX IS FOR SHELLS AND MEMBRANES REFERRED TO THE PROJECTION ON THE ELEMENT PLANE OF THE SUPERELEMENT                         
       X-AXIS BY DEFAULT OR OF A USERDEFINED VECTOR IF GIVEN (TRANSF=0). PROBLEM ELEMENTS ARE LISTED BELOW.                         
       ****************************************************************************************************                         
                                                                                                                                    
                                CARTESIAN COORDINATES            STRESS COMPONENTS (FORCES IF BEAS ELEMENTS)                        
                                                                                                                                    
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       1      1      1   0.000E+00  0.000E+00  0.000E+00  9.210E+00 -4.164E+00  2.776E+00 -8.222E-18  2.994E+00  4.491E+00     BEAS 
       1      1      2                                    9.210E+00 -4.164E+00  2.776E+00 -8.222E-18  1.606E+00  2.408E+00     BEAS 
       1      1      3   0.000E+00  0.000E+00  1.000E+00  9.210E+00 -4.164E+00  2.776E+00 -8.222E-18  2.174E-01  3.260E-01     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       2      1      1   0.000E+00  0.000E+00  1.000E+00  9.210E+00 -4.155E+00  2.770E+00 -8.222E-18  2.174E-01  3.260E-01     BEAS 
       2      1      2                                    9.210E+00 -4.155E+00  2.770E+00 -8.222E-18 -1.168E+00 -1.752E+00     BEAS 
       2      1      3   0.000E+00  0.000E+00  2.000E+00  9.210E+00 -4.155E+00  2.770E+00 -8.222E-18 -2.553E+00 -3.829E+00     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       3      1      1   0.000E+00  0.000E+00  2.000E+00  4.994E+00  7.427E+00  5.446E+00  5.782E-17  2.722E+00 -3.711E+00     BEAS 
       3      1      2                                    4.994E+00  7.427E+00  5.446E+00  5.782E-17 -1.506E-03  2.053E-03     BEAS 
       3      1      3   1.000E+00  0.000E+00  2.000E+00  4.994E+00  7.427E+00  5.446E+00  5.782E-17 -2.725E+00  3.715E+00     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       4      1      1   1.000E+00  0.000E+00  2.000E+00 -9.210E+00 -4.165E+00 -2.777E+00 -8.222E-18 -2.556E+00  3.834E+00     BEAS 
       4      1      2                                   -9.210E+00 -4.165E+00 -2.777E+00 -8.222E-18 -1.167E+00  1.751E+00     BEAS 
       4      1      3   1.000E+00  0.000E+00  1.000E+00 -9.210E+00 -4.165E+00 -2.777E+00 -8.222E-18  2.211E-01 -3.317E-01     BEAS 
  ELEMENT LOADCASE POINT       X          Y          Z         PX         PY         PZ         MX         MY         MZ            
       5      1      1   1.000E+00  0.000E+00  1.000E+00 -9.210E+00 -4.156E+00 -2.771E+00 -8.222E-18  2.211E-01 -3.317E-01     BEAS 
       5      1      2                                   -9.210E+00 -4.156E+00 -2.771E+00 -8.222E-18  1.606E+00 -2.410E+00     BEAS 
       5      1      3   1.000E+00  0.000E+00  0.000E+00 -9.210E+00 -4.156E+00 -2.771E+00 -8.222E-18  2.992E+00 -4.488E+00     BEAS 
  ELEMENT LOADCASE POINT    X          Y          Z         SIGX                                                                    
       6      1      1   5.000E-01  0.000E+00  1.500E+00  -2.282E-09                                                         TESS   
  ELEMENT LOADCASE POINT    X          Y          Z         SIGX                                                                    
       7      1      1   5.000E-01  0.000E+00  1.000E+00   1.401E+00                                                         TESS   
 
      Mass sum is missing                                                                                                           
 
 
 
 SUPERELEMENT TYPE:     1 ACTUAL ELEMENT:     1                                                                                     
 HAS BEEN STORED ON RESULT FILE                                                                                                     

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    18
                                                                                                                                    
                                        RETRACKING MODULE - GLOBAL DATA                                                             
                                                                                                                     SUB PAGE:     1
                                                                                                                                    
  SUM OF GLOBAL LOADS AND MOMENTS                                                                                                   
  *******************************                                                                                                   
                                                                                                                                    
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1            1.0000E+01    0.0000E+00    0.0000E+00    0.0000E+00    2.0000E+01    0.0000E+00                               

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    19
                                                                                                                                    
                                        RETRACKING MODULE - GLOBAL DATA                                                             
                                                                                                                     SUB PAGE:     2
                                                                                                                                    
  SUM OF REACTION FORCES AND MOMENTS                                                                                                
  **********************************                                                                                                
  GIVEN IN THE GLOBAL COORDINATE SYSTEM OF THE TOP LEVEL SUPERELEMENT                                                               
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1           -1.0000E+01   -1.3475E-14   -1.7764E-15    2.0966E-14   -2.0000E+01   -7.4911E-15                               

 DATE: 06-MAR-2012 TIME: 16:01:33   ***************  SESTRA  ***************                                             PAGE:    20
                                                                                                                                    
                                        RETRACKING MODULE - GLOBAL DATA                                                             
                                                                                                                     SUB PAGE:     3
                                                                                                                                    
  DIFFERENCES BETWEEN SUMMED LOADS AND REACTION FORCES                                                                              
  ****************************************************                                                                              
  LARGER THAN   0.00E+00 FOR TRANSLATIONAL COMPONENTS AND LARGER THAN   0.00E+00 FOR ROTATIONAL COMPONENTS                          
                                                                                                                                    
  LOADCASE (INDEX)        X             Y             Z            RX            RY            RZ                                   
 
        1            1.1902E-12   -1.3475E-14   -1.7764E-15    2.0966E-14    2.2915E-12   -7.4911E-15                               
 
  TOTAL TIME CONSUMED IN SESTRA                    CPU TIME:      0.11  CLOCK TIME:      0.13  CHANNEL TIME:      0.00              
