<?xml version="1.0"?>
<doc>
    <assembly>
        <name>DNVS.Sesam.Commons.SifTool</name>
    </assembly>
    <members>
        <member name="M:DNVS.Sesam.Commons.SifTool.ICheckDeflection.BuildTargetNodeSet(System.Int32,DNVS.Sesam.Commons.SifTool.ComparablePoint,DNVS.Sesam.Commons.SifTool.ComparablePoint,DNVS.Sesam.Commons.SifTool.ComparableVector,System.Double)">
            <summary>
            Given a super element and two points that define ends of a structural member, this method computes the set of nodes that belong to the structural member.
            For a given data base and a super element the method may be called repeatedly changing only the nodal inputs.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <param name="p1">The start point of the member.</param>
            <param name="p2">The end point of the member.</param>
            <param name="tol">A tolerence used in the search for points p1 and p2.</param>
            <returns>If the return value is true then the creation of target node set went well.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.ICheckDeflection.GetResultCaseNames(System.Int32)">
            <summary>
            Returns the list of result cases for the given super element.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <returns></returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.ICheckDeflection.GetDeflections(System.Int32,DNVS.Sesam.Commons.SifTool.ExternalResultData,DNVS.Sesam.Commons.SifTool.ComparableVector,System.Double@)">
            <summary>
            Given a super element, a result case and geometric data as produced by BuildTargetNodeSet this method computes the maximal deflection of a structural member.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <param name="externalResultData">The result case data.</param>
            <param name="direction">A vector normal to the vector the two member end points define, i.e. the vector "p1-p2". The vector "direction" cross "p1-p2" is the assumed axis of rotation in the start point p1.</param>
            <param name="dz">The absolute value of the maximal deflection of the member.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.ICheckDeflection.CloseDataBase">
            <summary>
            Closes the data base that was opened when the object was created, i.e. created by something like "ICheckDeflection anARSSIFTool = new ARSSIFTool(workExPath, filename)".
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.ICheckDeflection.SuperElementReferences">
            <summary>
            Returns the list of super element integer references that is used to set an element to the current element when deflection results are retrieved.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.IWindSearch">
            <summary>
            
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindSearch.GetInternalNodeNumber(System.Int32)">
            <summary>
            Return for an external node number the corresponding internal node number.
            </summary>
            <param name="externalNodeNumber">The external node number.</param>
            <returns>The corresponding internal node number.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindSearch.GetInternalNodeNumber(DNVS.Sesam.Commons.SifTool.ComparablePoint)">
            <summary>
            Return for a point the corresponding internal node number. If no exact match is found then the internal node number of the closest finite element node is returned.
            </summary>
            <param name="point">The point of interest.</param>
            <returns>The corresponding internal node number.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindSearch.GetNodeName(System.Int32)">
            <summary>
            Return for an external node number the corresponding name as a string. If no node name is attached to the node, then the external node number is returned as a string.
            </summary>
            <param name="externalNodeNumber">The external node number.</param>
            <returns>The corresponding node name.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindSearch.GetNodeName(DNVS.Sesam.Commons.SifTool.ComparablePoint)">
            <summary>
            Return for a point the corresponding name as a string. If no exact match is found then the internal node number of the closest finite element node is returned. If no node name is attached to this node, then the external node number is returned as a string.
            </summary>
            <param name="point">The point of interest.</param>
            <returns>The corresponding node name.</returns>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.WindSearchTool">
            <summary>
            
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.WindSearchTool.Init">
            <summary>
            Initialize SIFTool.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.IWindExtension">
            <summary>
            
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindExtension.CloseFrameworkResultDB">
            <summary>
            Close the Framework result data base.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindExtension.GetRVFATDAM">
            <summary>
            Retrieve from the SIFTool data base all RVFATDAM entries on pair element number and load case.
            </summary>
            <returns>A dictionary where the key is an element number and load case pair and the value is the associated data hold as a double array.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindExtension.GetTDFATDAM">
            <summary>
            Retrieve from the SIFTool data base all TDFATDAM entries on element number.
            </summary>
            <returns>A dictionary where the key is an element number and the value is the associated data hold as a list of strings.</returns>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.WindExtensionTool">
            <summary>
            
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.WindExtensionTool.#ctor(System.String,System.String)">
            <summary>
            Creates an instance and sets path and name to the SifTool data base.
            </summary>
            <param name="path">Path to the sin data base</param>
            <param name="name">Name of the sin data base</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.WindExtensionTool.Init">
            <summary>
            Initialize SIFTool.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.WindExtensionTool.InitWithName(System.String)">
            <summary>
            Initialize SIFTool.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.IWind">
            <summary>
            
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.Initialize">
            <summary>
            Initialise SIFTool.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.CreateDBForLoadGeneration">
            <summary>
            Open the internal SIFTool data bases, read the input FEM file and transfer contents to the SIFTool data bases.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.ReadBNLOAD(System.Boolean@)">
            <summary>
            Return BNLOAD cards from the input data file.
            </summary>
            <param name="moreRecords">False if all data read, or no data found.</param>
            <returns>A list of BNLOAD cards.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.ReadBELOAD1(System.Boolean@)">
            <summary>
            Return BELOAD1 cards from the input data file.
            </summary>
            <param name="moreRecords">False if all data read, or no data found.</param>
            <returns>A list of BELOAD1 cards.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.MoveDataToOutputFEM(System.String)">
            <summary>
            Transfer data from the internal SIFTool data base to the output FEM file, close the SIFTool data bases.
            </summary>
            <param name="FemFileName">The name of the new FEM file.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.MoveDataFromSinToFem(System.String,System.String)">
            <summary>
            Transfer data from a SIFTool data base to an output FEM file.
            </summary>
            <param name="FemFileName">The name of the new FEM file.</param>
            <param name="FemFileLocationPath">The location of the new FEM file.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.MoveDataFromFEMToSIN(System.String,System.String,System.String,System.String)">
            <summary>
            This is a helper routine that can convert a FEM file to a SIN file without further initialization. If it is used between other
            calls to SIFTool routines dependent on SRES73 state - then SRES73 must be called after this routine to reset state. The SIN
            file on imd_01 must be closed before this routine is used since imd_01 is used for the SIN file to be created.
            </summary>
            <param name="FEMFileName">Name of input FEM file.</param>
            <param name="FEMFilePath">Path to input FEM file.</param>
            <param name="SINFileName">Name set to output SIN file.</param>
            <param name="SINFilePath">Location for output SIN file.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.OpenFrameworkResultDB(System.String,System.String)">
            <summary>
            Open a Framework result data base.
            </summary>
            <param name="path">Name of the result data base.</param>
            <param name="name">Location of the result data base.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWind.CloseSIN">
            <summary>
            Close the SIN file opened by MoveDataFromFEMToSIN.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.ARSSIFToolWind">
            <summary>
            
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.ARSSIFToolWind.#ctor">
            <summary>
            Creates an instance and create an instance of the SIFToolInputOutput for conversion and data base read.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.ARSSIFToolWind.#ctor(System.String,System.String,System.String)">
            <summary>
            Creates an instance and sets some values.
            </summary>
            <param name="OutPutFilePathAndName">The path and file name for the message file, may be left empty (string.Empty).</param>
            <param name="FemFileName">Name of the input FEM file.</param>
            <param name="FemFileLocationPath">Location for the input FEM and for the output FEM.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.ARSSIFToolWind.#ctor(System.String,System.String,System.String,System.String)">
            <summary>
            Creates an instance and sets some values.
            </summary>
            <param name="OutPutFilePathAndName">The path and file name for the message file, may be left empty (string.Empty).</param>
            <param name="FemFileName">Name of the input FEM file.</param>
            <param name="FemFileLocationPath">Location for the input FEM and for the output FEM.</param>
            <param name="SinFileLocationPath">Location for the SIFTool data bases, if not given the data bases are placed at input FEM file location.</param>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader">
            <summary>
            General interface for reading input and results for sets, nodes or elements from a given .Sin file
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetCurrentSuperElement">
            <summary>
            Get current super element. Is default set to 1 when opening new .SIN file.
            </summary>
            <returns></returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.SetCurrentSuperElement(DNVS.Sesam.Commons.SifTool.SuperElementData)">
            <summary>
            Set the new current super element to retrieve results from.
            </summary>
            <param name="superElement">The super element that shall be the new current super element.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetAllSuperElements">
            <summary>
            Get a list of all super elements defined in this .SIN file
            </summary>
            <returns>List of all super elements</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetSetNames">
            <summary>
            Get names of sets for current superelement.
            </summary>
            <returns>Returns list of set Id numbers and set names</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetSetElements(System.Int32)">
            <summary>
            Get all elements in given set.
            </summary>
            <param name="setId">Id-number of set</param>
            <returns>List of internal element Id-numbers</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetSetBoundary(System.Int32,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get extend of set by min and max coordinates for given set.
            </summary>
            <param name="setId">Id-number of set</param>
            <param name="minX">Minimum x-coordinate</param>
            <param name="minY">Minimum y-coordinate</param>
            <param name="minZ">Minimum z-coordinate</param>
            <param name="maxX">Maximum x-coordinate</param>
            <param name="maxY">Maximum y-coordinate</param>
            <param name="maxZ">Maximum z-coordinate</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetResultCaseNames">
            <summary>
            Get a list of the Loadcase id-number and names
            </summary>
            <returns>List of Loadcase names</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetElementType(System.Int32)">
            <summary>
            Get the type number of the element
            </summary>
            <param name="internalElementId">The element internal Id-number</param>
            <returns>Type id</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetElementNodes(System.Int32)">
            <summary>
            Get the nodes defining an element.
            </summary>
            <param name="internalElementId">The element internal Id-number</param>
            <returns>List of nodes</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetExternalFromInternalElementId(System.Int32)">
            <summary>
            Get the external element id from the given internal element id.
            </summary>
            <param name="internalElementId">The internal element id</param>
            <returns>The external element id</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetInternalFromExternalElementId(System.Int32)">
            <summary>
            Get the internal element id from the given external element id.
            </summary>
            <param name="externalElementId">The external element id</param>
            <returns>The internal element id</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetElementMaterial(System.Int32,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get the material of a surface shell or membrane element
            </summary>
            <param name="internalElementId">The internal element id</param>
            <param name="thickness">Thickness of plate</param>
            <param name="yield">Yield stress of plate material</param>
            <param name="elasticEModule">E-module</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetElementCenterStress(System.Int32,System.Int32,System.Double@,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get stresses in local x and y direction at the center of the element.
            </summary>
            <param name="internalElementId">The internal element id</param>
            <param name="loadId">Loadcase id</param>
            <param name="sigmaX">Average tension stress in local x-direction</param>
            <param name="sigmaY">Average tension stress in local y-direction</param>
            <param name="tau">Average shear stress in local x- and y-direction</param>
            <param name="vonMises">Maximal vonMises stress for stress points inside element</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetElementSurfacePressure(System.Int32,System.Int32)">
            <summary>
            Get the average lateral pressure for a specified shell element in the specified loadcase
            </summary>
            <param name="internalElementId">The internal element number</param>
            <param name="loadCaseId">The load case id number</param>
            <returns>The sum of surface loads for given element in given loadcase</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetElementSurfacePressures(System.Collections.Generic.List{System.Int32},System.Collections.Generic.List{System.Int32})">
            <summary>
            Get the average lateral pressure for specified shell elements for the specified loadcases
            </summary>
            <param name="internalElementIds">List of internal element id's</param>
            <param name="loadCaseIds">List of load case id's</param>
            <returns>One list for each element with pressures in each load case</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetBeamSectionCardNames">
            <summary>
            Get a list of used beam section cards for current super element
            </summary>
            <returns>List of Section card names</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetBeamSection(System.Int32)">
            <summary>
            Get the beam cross section geometry for a given beam element.
            </summary>
            <param name="internalElementId">Internal element id</param>
            <returns>Beam Section Card object</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetBeamSections(System.Collections.Generic.List{System.Int32},System.Collections.Generic.Dictionary{System.Int32,System.Int32}@)">
            <summary>
            Get the beam cross section geometries used for given beam elements, listed by beam section geometry number.
            </summary>
            <param name="internalElementIds">List of internal bam element Id's. Any plate elements are neglected.</param>
            <param name="elementToGeoNoMapping">Mapping of beam section geometry number for given element number</param>
            <returns>returns beam cross section geometries, listed by geometry number.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetBeamSectionProperties(System.Int32,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get the general beam data for cross section properties
            </summary>
            <param name="internalElementId">Internal Element Id.</param>
            <param name="area">AREA: Cross section area</param>
            <param name="sectModWx">WXMIN: Minimum torsional section modulus about shear center (=IX/rmax for a PIPE element)</param>
            <param name="sectModWy">WYMIN: Minimum sectionmodulus about y-axis = IY/zmax</param>
            <param name="sectModWz">WZMIN: Minimum sectionmodulus about z axis = IZ/ymax</param>
            <param name="staticAreaSy">SY Static area moment about y-axis</param>
            <param name="staticAreaSz">SZ Static area moment about z-axis</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IGeneralResultFileReader.GetBeamElementStress(System.Int32,System.Int32,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@)">
            <summary>
            Get the stresses in the extreme points for a beam element.
            </summary>
            <param name="internalElementId">Element id-number</param>
            <param name="loadId">Load result case id-number</param>
            <param name="sigxxArray">Axial stress</param>
            <param name="sigbyxArray">Bending stress about local y-axis</param>
            <param name="sigbzxArray">Bending stress about local z-axis</param>
            <param name="tauTxArray">Torsion stress</param>
            <param name="tauxyArray">Shear stress in local y-direction</param>
            <param name="tauxzArray">Shear stress in local z-direction</param>
            <param name="vonMisesArray">Combined von Mises stress</param>
            <returns>Error code. Returns 0 if OK</returns>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GeneralResultFileReader">
            <summary>
            Implementation of general interface for reading input and results for sets, nodes or elements from a given .Sin file
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GeneralResultFileReader.#ctor(System.String)">
            <summary>
            Initialize class with specified .SIN file. Exception is given if file is not found.
            </summary>
            <param name="sinFullPathAndFileName">Full path and name of the .sin file</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GeneralResultFileReader.#ctor(System.String,System.String)">
            <summary>
            Initialize class with specified .SIN file. Exception is given if file is not found.
            </summary>
            <param name="sinFullPathAndFileName">Full path and name of the .sin file</param>
            <param name="messageFilePath">Optional path to the SIFTOOL.MLG message file. Must be a directory where the user has write acess.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GeneralResultFileReader.InitializeResultFileReader(System.String,System.String)">
            <summary>
            Initialize class with specified .SIN file. Exception is given if file is not found.
            </summary>
            <param name="sinFullPathAndFileName">Full path and name of the .sin file</param>
            <param name="messageFilePath">Optional path to the SifTool.MLG message file. Must be a directory where the user has write acess.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GeneralResultFileReader.ConvertComponentLoadToNormalPressure(System.Int32,System.Double,System.Double,System.Double)">
            <summary> Calculate element normal vector and get component load part in that direction. </summary>
            <param name="internalElementId">Element id.</param>
            <param name="xPart">Load in x-direction.</param>
            <param name="yPart">Load in y-direction.</param>
            <param name="zPart">Load in z-direction.</param>
            <returns>Normal pressure load.</returns>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.BasicSIFTool">
            <summary>
            This implementation does only forward calls to the
            proper internal class that does the conversion.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.IBasicSIFTool">
            <summary>
            IBasicSIFTool: A public interface to basic SIFTool abstractions.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.Open(System.String,System.String,System.String,System.String)">
            <summary>
            Opens an existing SIN data base. Currently error if other file types are tried. The name is prefix+filename.
            </summary>
            <param name="prefix">File path and possible prefix to the file name</param>
            <param name="filename">The file name</param>
            <param name="extension">The file type, i.e. .SIN, .SIF, .SIF.</param>
            <param name="status">The status of the file type, i.e. "OLD", "READ", "NEW", "SCRATCH".</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.Close">
            <summary>
            Closes the data base that was opened by means of "void Open(string prefix, string filename, string extension);".
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.CloseMessageFile">
            <summary>
            Closes the message file that was opened when SIFTool was initialised.
            </summary>
        </member>
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.Contents" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetResultCaseNames(System.Int32)" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.Results(DNVS.Sesam.Commons.SifTool.SuperElementData)" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.CardResult(System.String,System.Int32)" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetSetRelationShips(System.Int32)" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetInternal2ExternalElementNumberMap(System.Int32)" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetExternal2InternalElementNumberMap(System.Int32)" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetInternal2ExternalNodeNumberMap(System.Int32)" -->
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetExternal2InternalNodeNumberMap(System.Int32)" -->
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetElement(System.Int32,System.Int32)">
            <summary>
            Retrieves the element data for an element on key superElementReference.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <param name="elementNumber">The element integer identificator.</param>
            <returns>Element</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetElementResult(System.Int32,DNVS.Sesam.Commons.SifTool.ExternalResultData,System.Int32)">
            <summary>
            Retrieves the element result data for an element on key superElementReference and ExternalResultCaseNumber.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <param name="externalResultData">The result case data.</param>
            <param name="elementNumber">The element integer identificator.</param>
            <returns>ElementResult</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.BuildTargetNodeSet(System.Int32,DNVS.Sesam.Commons.SifTool.ComparablePoint,DNVS.Sesam.Commons.SifTool.ComparablePoint,DNVS.Sesam.Commons.SifTool.ComparableVector,System.Double)">
            <summary>
            Given a super element and two points that define ends of a structural member, this method computes the set of nodes that belong to the structural member.
            For a given data base and a super element the method may be called repeatedly changing only the nodal inputs.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <param name="p1">The start point of the member.</param>
            <param name="p2">The end point of the member.</param>
            <param name="direction">A vector normal to the vector the two member end points define, i.e. the vector "p1-p2". The vector "direction" cross "p1-p2" is the assumed axis of rotation in the start point p1.</param>
            <param name="tol">A tolerence used in the search for points p1 and p2.</param>
            <returns>If the return value is true then the creation of target node set went well.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetResultCaseName(System.Int32,System.Int32)">
            <summary>
            Returns the list of result cases for the given super element.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <returns></returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBasicSIFTool.GetDeflections(System.Int32,DNVS.Sesam.Commons.SifTool.ExternalResultData,DNVS.Sesam.Commons.SifTool.ComparableVector,System.Double@)">
            <summary>
            Given a super element, a result case and geometric data as produced by BuildTargetNodeSet this method computes the maximal deflection of a structural member.
            </summary>
            <param name="superElementReference">The super element integer identificator.</param>
            <param name="externalResultData">The result case data.</param>
            <param name="direction">A vector normal to the vector the two member end points define, i.e. the vector "p1-p2". The vector "direction" cross "p1-p2" is the assumed axis of rotation in the start point p1.</param>
            <param name="dist">The absolute value of the maximal deflection of the member.</param>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.IBuildInterfaceFileInternal">
            <summary>
            This interface provides functionality that support model file generation from a new or existing SIN File.
            If the SIN file is new the client application should provide data as specified.
            If the SIN file is already created then conversion to a FEM file is the only task needed.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBuildInterfaceFileInternal.WriteFEMFile">
            <summary>
            Open a new FEM file
            Converts and moves data to the FEM file.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBuildInterfaceFile.OpenSINDataBase(System.String,System.String)">
            <summary>
            Open an existing SIN data base.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBuildInterfaceFile.OpenNewSINDataBase(System.String,System.String)">
            <summary>
            Opne a new SIN data base.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IBuildInterfaceFile.Close">
            <summary>
            Closes the SIN data base and the FEM file.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.HandlingFrameworkResultData.OpenFrameworkResultDB(System.String,System.String)">
            <summary>
            Open an existing SIFTool data base. The data base is imd_01.
            </summary>
            <param name="path">Location of the data base.</param>
            <param name="name">Name of the data base.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.HandlingFrameworkResultData.CloseFrameworkResultDB">
            <summary>
            Close SIFTool data base opened as imd_01.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.HandlingFrameworkResultData.GetRVFatDamCards">
            <summary>
            Create a dictionary of key an element number and a load case with value double arrays that holds the RVFATDAM data.
            </summary>
            <returns>A dictionary of key an element number and a load case with value double arrays that holds the individual RVFATDAM data.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.HandlingFrameworkResultData.GetTDFatDamCards">
            <summary>
            Create a list of list of strings that holds the TDFATDAM data.
            </summary>
            <returns>A list of list of strings that holds the TDFATDAM data.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.HandlingFrameworkResultData.MoveDataToOutputFEM(System.Int32,System.String,System.String)">
            <summary>
            Move data from the imd_01 SIFTool data base to a FEM file.
            </summary>
            <param name="unitFEM">Unit number for the FEM file when created.</param>
            <param name="FemFileName">Name of the FEM file to be created Timd_01 is added to the name.</param>
            <param name="FemFileLocationPath"></param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.InitializeSIFTool.SIFTol">
            <summary>
            Initialize SIFTool.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolInputOutput.MoveDataToOutputFEM(System.Int32,System.String)">
            <summary>
            Move data from SIFTool data base imd_01 to the output FEM file.
            </summary>
            <param name="unitFEM">The lowest numbered FEM file unit available for the client application</param>
            <param name="FemFileName">The name of the new FEM file.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolInputOutput.MoveDataFromFEMToSIN(System.Int32,System.String,System.String,System.String,System.String)">
            <summary>
            This is a helper routine that can convert a FEM file to a SIN file without further initialization. If it is used between other
            calls to SIFTool routines dependent on SRES73 state - then SRES73 must be called after this routine to reset state. The SIN
            file on imd_01 must be closed before this routine is used since imd_01 is used for the SIN file to be created.
            </summary>
            <param name="unitFEM">Unit for the incoming FEM file.</param>
            <param name="FEMFileName">Name of input FEM file.</param>
            <param name="FEMFilePath">Path to input FEM file.</param>
            <param name="SINFileName">Name set to output SIN file.</param>
            <param name="SINFilePath">Location for output SIN file.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolInputOutput.ReadFEMandCreateLoadSIN(System.Int32)">
            <summary>
            Open SIFTool data base imd_02 for load data from the input FEM file, transfer data to the file, save pointer tables,
            and set SIFTool data base imd_02 as input and SIFTool data base imd_01 as output for further processing.
            </summary>
            <param name="unitFEM"></param>
        </member>
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.SIFToolInputOutput.ReadFEMAndCreateSIN(System.Int32)" -->
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolInputOutput.Close">
            <summary>
            Close the two SIFTool data bases that have been opened by the wind extension client.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.BasicLoad">
            <summary>
            A SIF load definition. Inherited by the specific cards which are supposed to be sealed.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.BNLoad">
            <summary>
            BNLOAD definition card. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BNLoad.#ctor">
            <summary>
            Creates an instance.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BNLoad.#ctor(System.String)">
            <summary>
            Creates an instance given a string that holds file path and name to a formatted file that contains BNLOAD cards.
            </summary>
            <param name="fileName">The file path and name to a formatted file that contains BNLOAD cards.</param>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.BELoad1">
            <summary>
            BELOAD1 definition card. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BELoad1.#ctor">
            <summary>
            Creates an instance.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BELoad1.#ctor(System.String)">
            <summary>
            Creates an instance given a string that holds file path and name to a formatted file that contains BELOAD1 cards.
            </summary>
            <param name="fileName">The file path and name to a formatted file that contains BELOAD1 cards.</param>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.BeUsLo">
            <summary>
            BEUSLO definition card for Uniform Surface Load. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BeUsLo.#ctor">
            <summary>
            Creates an instance.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BeUsLo.#ctor(System.String)">
            <summary>
            Creates an instance given a string that holds file path and name to a formatted file that contains BEUSLO cards.
            </summary>
            <param name="fileName">The file path and name to a formatted file that contains BELOAD1 cards.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BeUsLo.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains BEUSLO cards.
            </summary>
            <param name="loadCard">The superelement result card.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BeUsLo.ComputeLength(System.Double[])">
            <summary> 
            Compute number of value items for this BEUSLO card.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BeUsLo.RealLoadPart(System.Int32)">
            <summary>
            RLOAD(i) - Real Load part for node or degree of freedom number.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BeUsLo.ImaginaryLoadPart(System.Int32)">
            <summary>
            ILOAD(i) - Real Load part for node or degree of freedom number.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.LocalLoadCase">
            <summary> 
            LLC - Local Load Case number.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.LoadType">
            <summary>
            LOTYP - Load Type number: 
            = 1 normal pressure, conservative load. ;
            = 2 load given in component form, conservative load. ;
            = 3 dummy hydro pressure, used to indicate the direction of hydrostatic / hydrodynamic pressure to be computed by a hydrodynamic load program. ;
            =-1 normal pressure, nonconservative load. ;
            =-2 load given in component form, nonconservative load. ;
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.Complex">
            <summary>
            COMPLX - Phase shift definition.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.Layer">
            <summary>
            LAYER - Layer number for elements with more than one layer.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.InternalElementNumber">
            <summary>
            ELNO - Internal Element number.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.NumberOfLoadParts">
            <summary>
            NDOF - Number of nodes or degrees of fredom, (depending on LOTYP).
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.IntegrationNumber">
            <summary>
            INTNO - Load Type number.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BeUsLo.Side">
            <summary>
            SIDE - side definition.
            For shell elements:
            = 1 loads referred to element side where z=-1. ;
            = 2 loads referred to element side where z= 0. ;
            = 3 loads referred to element side where z= 1. ;
            For solid elements: a six figures number for a hexahedron, 
            a five figures number for a prism and a four figures number for a tetrahedron,
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.ReadDataFromSIFToolDB`1">
            <summary>
            A class that provides functionality for reading BNLOAD or BELOAD1 cards from a SIFTool data base. Cards are read in a complete sequence.
            </summary>
            <typeparam name="T">Load card type, i.e. BELoad1, BNLoad, etc.</typeparam>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.ReadDataFromSIFToolDB`1.#ctor">
            <summary>
            Construct a reader that can read a complete sequence of BNLOAD or BELOAD1 cards.
            </summary>
        </member>
        <!-- Badly formed XML comment ignored for member "M:DNVS.Sesam.Commons.SifTool.ReadDataFromSIFToolDB`1.Read(System.Boolean@)" -->
        <member name="T:DNVS.Sesam.Commons.SifTool.BasicBeamSection">
            <summary>
            A SIF beam section definition. Inherited by the specific cards which are supposed to be sealed.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.BasicBeamSection.#ctor(System.String,System.Int32,DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            
            </summary>
            <param name="name">Sestra Card Name</param>
            <param name="numberOfControlData">Minimum number of fixed control data to read in</param>
            <param name="sectionCard"></param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.Name">
            <summary>
            Sestra Card name
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.NumberOfControlData">
            <summary>
            Minimum number of fixed control data to read in for this card type.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.Length">
            <summary>
            Total number of data for this card.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.GeoNo">
            <summary>
            GEONO: Geometry type number, i.e. reference number used for element data definition of geometry properties (Cross sectional properties) of beams.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.ShearFactorY">
            <summary>
            SFY Factor modifying the shear areas calculated by the preprocessor program 
            such that the modified shear areas are respectively: SHARY(MOD) = SHARY(PROG) · SFY
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.ShearFactorZ">
            <summary>
            SFZ Factor modifying the shear areas calculated by the preprocessor program 
            such that the modified shear areas are respectively: SHARY(MOD) = SHARY(PROG) · SFY
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.NloBy">
            <summary>
            NLOBY Number of integration points in Y’ direction (optional)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.BasicBeamSection.NloBz">
            <summary>
            NLOBZ Number of integration points in Z’ direction (optional)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GBarm">
            <summary>
            GBARM definition card for Bar cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GBarm.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GBARM cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBarm.HeightZ">
            <summary>
            HZ Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBarm.WidthTop">
            <summary>
            BT Width of bar at top. For massive bars which are not able to have different widths at top and bottom this variable is used as the width of the beam.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBarm.WidthBot">
            <summary>
            BB Width of bar at bottom. If zero or null, then equal to WidthTop
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GLsec">
            <summary>
            GLSECT definition card for L-beam cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GLsec.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GLSEC cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsec.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsec.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsec.WidthBy">
            <summary>
            BY: Width of beam flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsec.FlangeTz">
            <summary>
            TZ: Thickness of the beam flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsec.WebOrientationK">
            <summary>
            K Web orientation: 
            =0 web located in the negative local ydirection (and consequently flange in the postitive y’direction) 
            =1 web located in the positive local ydirection (and consequently flange in the negative y’direction)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GLsecR">
            <summary>
            GLSECTR definition card for L-beam cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GLsecR.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GLSEC cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsecR.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsecR.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsecR.WidthBy">
            <summary>
            BY: Width of beam flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsecR.FlangeTz">
            <summary>
            TZ: Thickness of the beam flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsecR.WebOrientationK">
            <summary>
            K Web orientation: 
            =0 web located in the negative local ydirection (and consequently flange in the postitive y’direction) 
            =1 web located in the positive local ydirection (and consequently flange in the negative y’direction)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GLsecR.Radius">
            <summary>
            R: Radius of inside curvature.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GIorH">
            <summary>
            GIORH definition card for I or H-beam cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GIorH.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GIORH cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.WidthBtop">
            <summary>
            BT: Width of beam top flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.FlangeTtop">
            <summary>
            TT: Thickness of the beam top Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.WidthBbot">
            <summary>
            BB: Width of beam top flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.FlangeTbot">
            <summary>
            TB: Thickness of the beam bottom Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.NloByTop">
            <summary>
            NLOBYT: Number of integration points in top flange (optional)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorH.NloByBot">
            <summary>
            NLOBYB: Number of integration points in bottom flange (optional)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GIorHr">
            <summary>
            GIORHR definition card for I or H-beam cross sections with radius. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GIorHr.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GIORHR cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.WidthBtop">
            <summary>
            BT: Width of beam top flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.FlangeTtop">
            <summary>
            TT: Thickness of the beam top Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.WidthBbot">
            <summary>
            BB: Width of beam top flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.FlangeTbot">
            <summary>
            TB: Thickness of the beam bottom Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.RadiusTop">
            <summary>
            RT: Radius of inside curvature at top
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.RadiusBot">
            <summary>
            RB: Radius of inside curvature at bottom
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.NloByTop">
            <summary>
            NLOBYT: Number of integration points in top flange (optional)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GIorHr.NloByBot">
            <summary>
            NLOBYB: Number of integration points in bottom flange (optional)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GUsyI">
            <summary>
            GUSYI definition card for unsymmetrical I-beam cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GUsyI.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GUSYI cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.WidthBtop">
            <summary>
            BT: Width of beam top flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.FlangeB1">
            <summary>
            B1: Width of half topflange in positive local ydirection
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.FlangeTtop">
            <summary>
            TT: Thickness of the beam top Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.WidthBbot">
            <summary>
            BB: Width of beam top flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.FlangeB2">
            <summary>
            B2: Width of half bottomflange in positive local ydirection
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.FlangeTbot">
            <summary>
            TB: Thickness of the beam bottom Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.NloByTop">
            <summary>
            NLOBYT: Number of integration points in top flange (optional)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GUsyI.NloByBot">
            <summary>
            NLOBYB: Number of integration points in bottom flange (optional)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GChan">
            <summary>
            GCHAN definition card for Channel-beam cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GChan.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GCHAN cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChan.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChan.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChan.WidthBy">
            <summary>
            BY: Width of beam flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChan.FlangeTz">
            <summary>
            TZ: Thickness of the beam flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChan.WebOrientationK">
            <summary>
            K Web orientation: 
            =0 web located in the negative local ydirection (and consequently flange in the postitive y’direction) 
            =1 web located in the positive local ydirection (and consequently flange in the negative y’direction)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GChanR">
            <summary>
            GCHANR definition card for Channel-beam cross sections with inside curvature. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GChanR.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GCHAN cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChanR.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChanR.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChanR.WidthBy">
            <summary>
            BY: Width of beam flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChanR.FlangeTz">
            <summary>
            TZ: Thickness of the beam flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChanR.WebOrientationK">
            <summary>
            K Web orientation: 
            =0 web located in the negative local ydirection (and consequently flange in the postitive y’direction) 
            =1 web located in the positive local ydirection (and consequently flange in the negative y’direction)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GChanR.Radius">
            <summary>
            R: Radius of inside curvature.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GBox">
            <summary>
            GBOX definition card for L-beam cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GBox.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GBOX cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBox.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBox.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBox.FlangeTbot">
            <summary>
            TB: Thickness of the beam bottom flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBox.FlangeTtop">
            <summary>
            TT: Thickness of the beam top flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GBox.WidthBy">
            <summary>
            BY: Width of beam flange
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GPipe">
            <summary>
            GPipe definition card for hollow tube cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GPipe.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GPIPE cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GPipe.InnerDia">
            <summary>
            DI: Inner diameter of tube. (Calculated if T is given)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GPipe.OuterDia">
            <summary>
            DY: Outer diameter of tube. (mandatory)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GPipe.Thickness">
            <summary>
            T: Thickness of tube. (Calculated if DI is given).
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GPipe.NCircle">
            <summary>
            NCIR: Number of integration points in circumferential direction respectively (optional)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GPipe.NRadial">
            <summary>
            NRAD: Number of integration points in radial direction respectively (optional)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GTonP">
            <summary>
            GTONP definition card for T-beam cross sections on plate. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GTonP.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GTONP cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.WidthBtop">
            <summary>
            BT: Width of beam top flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.FlangeTtop">
            <summary>
            TT: Thickness of the beam top Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.WidthBplate">
            <summary>
            BP: Width of beam plate flange
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.FlangeTplate">
            <summary>
            TP: Thickness of the beam plate Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.NloByTop">
            <summary>
            NLOBYT: Number of integration points in top flange (optional)
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GTonP.NloByBot">
            <summary>
            NLOBYB: Number of integration points in bottom flange (optional)
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.GDoBo">
            <summary>
            GDOBO definition card for double bottom cross sections. A sealed class.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.GDoBo.#ctor(DNVS.Sesam.Commons.SifTool.SuperElementResults)">
            <summary>
            Creates an instance that contains GDOBO cards.
            </summary>
            <param name="sectionCard">The superelement result card.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GDoBo.HeightZ">
            <summary>
            HZ: Height of beam. 
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GDoBo.WebTy">
            <summary>
            TY: Thickness of the beam web.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GDoBo.WidthBtop">
            <summary>
            BY: Width of beam plates
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GDoBo.FlangeTtop">
            <summary>
            TT: Thickness of the beam top Flange.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.GDoBo.FlangeTplate">
            <summary>
            TB: Thickness of the beam bottom Flange.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.AnalysisModel">
            <summary>
            This class builds a SIN data base and convert to a FEM file.
            This class can take an existing SIN data base and convert to a FEM file.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.ComparableNumber`1">
            <summary>
            A generic number that implements IComparable.
            </summary>
            <typeparam name="T">Standard value types are supported.</typeparam>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.ComparablePair`1">
            <summary>
            A generic pair that implements IComparable.
            </summary>
            <typeparam name="T">Standard value types are supported.</typeparam>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.AdministrateDataRecord.InitializeRecord">
            <summary>
            Create record array of initial length if record is null.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.AdministrateDataRecord.InitializeRecordArray(System.Double)">
            <summary>
            Initialize record array.
            </summary>
            <param name="d">The value to be assigned.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.AdministrateDataRecord.AddToRecordArray(DNVS.Sesam.Commons.SifTool.AdministrateDataRecord,System.Int32,System.Int32)">
            <summary>
            Adds the record array to the current record array.
            </summary>
            <param name="aRecord">Input record for which data will be added</param>
            <param name="fromIndex">Index on which to start.</param>
            <param name="arrayLength">Size of input data record</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.AdministrateDataRecord.ExtendRecord">
            <summary>
            Length of record array doubles - data is lost.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.AdministrateDataRecord.ExtendRecordAndKeepData">
            <summary>
            Length of record array doubles - data is saved.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindMerge.Prepare">
            <summary>
            Prepare for merge.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindMerge.ReadBnload">
            <summary>
            Return BNLOAD cards from the input data file.
            </summary>
            <returns>In increasing order of node numbers it returns for each unique node/loadcase a list of BNLOAD cards.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindMerge.WriteBnload(System.Double[])">
            <summary>
            Writes a BNLOAD card to file.
            </summary>
            <param name="data">The BNLOAD data.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindMerge.ReadBeload1">
            <summary>
            Return BELOAD1 cards from the input data file.
            </summary>
            <returns>In increasing order of element numbers it returns for each unique element/loadcase a list of BELOAD1 cards.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindMerge.WriteBeload1(System.Double[])">
            <summary>
            Writes a BELOAD1 card to file.
            </summary>
            <param name="data">The BELOAD1 data.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.IWindMerge.Finalise">
            <summary>
            Finalise data transfer.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.PriorityQueue`2.#ctor">
            <summary>
            Initializes a new instance of the PriorityQueue class that is empty,
            has the default initial capacity, and uses the default IComparer.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.PriorityQueue`2.Remove(`0,System.Collections.IEqualityComparer)">
            <summary>
            Removes the item with the specified value from the queue.
            The passed equality comparison is used.
            </summary>
            <param name="item">The item to be removed.</param>
            <param name="comp">An object that implements the IEqualityComparer interface
            for the type of item in the collection.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.PriorityQueue`2.Remove(`0)">
            <summary>
            Removes the item with the specified value from the queue.
            The default type comparison function is used.
            </summary>
            <param name="item">The item to be removed.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.PriorityQueue`2.TrimExcess">
            <summary>
            Set the capacity to the actual number of items, if the current
            number of items is less than 90 percent of the current capacity.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.SifCard_Index">
            <summary>
            An indexer for the DNVS.Commons.IO SifCard.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifCard_Index.#ctor(System.String,System.Int32[])">
            <summary>
            Create an instance.
            </summary>
            <param name="ident">Name/identity.</param>
            <param name="indexValues">Indexer definition, indexValues[0] = number of index values (n = 0, 1 , 2, 3) if zero it is a non-indexed card, indexValues[i] for i = 1, n give the 1, 2, or 3 indices used to index the card.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifCard_Index.#ctor(System.String,System.Int32[],System.Boolean)">
            <summary>
            Create an instance.
            </summary>
            <param name="ident">Name/identity.</param>
            <param name="indexValues">Indexer definition, indexValues[0] = number of index values (n = 0, 1, 2, 3) if zero it is a non-indexed card, indexValues[i] for i = 1, n give the 1., 2., and 3. index for the indexer.</param>
            <param name="swap">If true, then swap the lexicographic sort order. Does only apply for index set larger than one.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifCard_Index.GetLexicoGraphicIndex(DNVS.Sesam.Commons.SifTool.SifCard_Index)">
            <summary>
            Returns an index for order comparison. Used by IComparable.
            </summary>
            <param name="other">The card index to compare to.</param>
            <returns>If "this" = "other", then it returns 0. If "this" is the largest 1, else -1.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifCard_Index.CompareIndexValues(System.Int32,System.Int32)">
            <summary>
            Compare two indices.
            </summary>
            <param name="i_this">This index.</param>
            <param name="i_other">Other index.</param>
            <returns>Returns: same index = 0, if this index is the largest = 1, else = -1.</returns>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.SifCardIndexInfo">
            <summary>
            Sif card index info helper class. Only information for first level super elements.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifCardIndexInfo.GetInfo(DNVS.Sesam.Commons.IO.SifCard)">
            <summary>
            Get the index info for the card.
            </summary>
            <param name = "card">The sif card.</param>
            <returns>The index info for the given card as a string.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifCardIndexInfo.GetIndexInfo(DNVS.Sesam.Commons.IO.SifCard)">
            <summary>
            Get the index info for the card.
            </summary>
            <param name = "card">The sif card.</param>
            <returns>The index info for the given card as an int-array.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifCardIndexInfo.GetSifCardOrder(System.String)">
            <summary>
            Gives for each SIF-card an integer that tells at which position it is written to formatted files, i.e. a sort ordering for the SIF-cards.
            </summary>
            <param name="ident">Name of the SIF-card.</param>
            <returns>An integer that gives SIF-card sort order.</returns>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.SifCardIndexInfo.SifCardOrder">
            <summary>
            This enum gives the unique SIF-card sort order.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.SifCardSet">
            <summary>
            A class that holds a list of the SIF-cards currently implemented.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.SIFResultsReader">
            <summary>
            A class that enables read of SIFTool SIN results.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFResultsReader.#ctor(System.String,System.String)">
            <summary>
            Creates a Siftool reader.
            </summary>
            <param name="path">SIFTool data base file system location.</param>
            <param name="name">SIFTool data base name - without extension.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFResultsReader.ConvertToFEM(System.String,System.String)">
            <summary>
            Converts a SIFTool data base to a formatted FEM file.
            </summary>
            <param name="path">File system location for the new FEM file.</param>
            <param name="name">FEM file name - without extension.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFResultsReader.ReadRDResRef">
            <summary>
            Reads the RDRESREF cards.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.SIFResultsReader.SuperElementID">
            <summary>
            The super element identification.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolStaticHelpers.CreateArraySegment(System.Double[])">
            <summary>
            Copy one double array into a new double array.
            </summary>
            <param name="segmentA">The double array to copy. Number of positions to copy is found in first position.</param>
            <returns>A double array.</returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolStaticHelpers.SuperElementId">
            <summary>
            Get the super element id of a unique super element in the SIFTool data base.
            This method is only guaranteed for one super element present in the data base.
            </summary>
            <returns></returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolStaticHelpers.MoveDataFromSINToFEM(System.Int32,System.String)">
            <summary>
            Notice that the SIN data base must be open and must have imd = SIFToolConstants.imd_01.
            </summary>
            <param name="unitFEM">The unit for the FEM output file.</param>
            <param name="FEMFilePathAndName">A legal path and fem file name.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolStaticHelpers.MoveDataFromFEMToSIN_A(System.Int32,System.String,System.String,System.String,System.String)">
            <summary>
            
            </summary>
            <param name="unitFEM"></param>
            <param name="FEMFileName"></param>
            <param name="FEMFilePath"></param>
            <param name="SINFileName"></param>
            <param name="SINFilePath"></param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFToolStaticHelpers.MoveDataFromFEMToSIN(System.Boolean,System.Int32,System.String,System.String)">
            <summary>
            This is a helper routine that can convert a FEM file to a SIN file without further initialization. If it is used between other
            calls to SIFTool routines dependent on SRES73 state - then SRES73 must be called after this routine to reset state. The SIN
            file on imd_01 must be closed before this routine is used since imd_01 is used for the SIN file to be created. Pointer tables
            are saved before the output SIN file is closed in order to open it for susbequent use.
            </summary>
            <param name="CloseSinFile">Whether the resulting SIN file should be closed on exit.</param>
            <param name="unitFEM">The unit for the FEM input file.</param>
            <param name="FEMFilePathAndName">Location and name for the input FEM file.</param>
            <param name="SINFilePathAndName">Location and name for the SIN file to be created.</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.CLOS73(System.Int32@,System.Int32@)">
            <summary>
            Close a SIFTool data base file. Release pointer table header for all data groups and close result files.
            </summary>
            <param name="IMD">
            Input: Data base number.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.CLOSSQ(System.Int32@,System.Int32@)">
            <summary>
            Close a Fortran file.
            </summary>
            <param name="IUNIT">
            Input: Unit number of the Fortran file.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.CSEL73(System.Int32@,System.Int32@)">
            <summary>
            Fetch pointer tables for superelement in direct access file.
            </summary>
            <param name="IREF">
            Input: Hierarcy Reference number. Set IREF = 0 on input to get the first super element reference number returned in IREF.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.DREC73(System.String,System.Int32@,System.Int32[],System.Int32@,System.Int32@)">
            <summary>
            Delete specified record from random access file.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="NWG">
            Output: Number of words.
            </param>
            <param name="IREF">
            Input: Reference value array.
            </param>
            <param name="NIREF">
            Input: Number of reference values.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.DTAB73(System.String,System.Int32@)">
            <summary>
            Release result data for specified data group in random access file.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.FSAV73(System.Int32@,System.Int32@)">
            <summary>
            Flush pointer tables for superelement in direct access file.
            </summary>
            <param name="IREF">
            Input: Super element reference number.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GESLST(System.Int32@,System.Int32[],System.Int32@,System.Int32@)">
            <summary>
            Get list of 1st level super elements.
            </summary>
            <param name="IHTOP">
            Input: Top hierarchy reference of current branch.
            </param>
            <param name="ISHREF">
            Output: List of superelement references.
            </param>
            <param name="N1LSEL">
            Output: Length of list. N1LSEL = 0: No hierarchy data found, only one superelement is present. N1LSEL&gt;0: Hierarchy data found
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GNRC73(System.String,System.Int32@,System.Int32[],System.Int32@,System.Int32@)">
            <summary>
            Get number of records of a data group.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="NREC">
            Output: Number of records stored. This value should not be used to make assumptions about reference values.
            </param>
            <param name="IREF">
            Output: Highest reference number array(3). This array will be filled in with the highest reference value occurring for each of NREF references.
            </param>
            <param name="NREF">
            Output: Number and type of references. = 0 Records without reference stored sequentially. = 1 One reference number. = 2 Two reference numbers. = 3 Three reference numbers.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GREC73(System.String@,System.Int32@,System.Double[],System.Int32@,System.Int32@)">
            <summary>
            Get data group in sequential order.
            </summary>
            <param name="IDGR">
            Data group type. Input: When input file is binary. Output: When a formatted sequential file is read.
            </param>
            <param name="NWG">
            Output: Number of words returned in record array.
            </param>
            <param name="REC">
            Output: Record array.
            </param>
            <param name="NREC">
            Input: Maximum size of record array.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GRES73(System.String,System.Int32@,System.Int32[],System.Int32@,System.Double[],System.Int32@,System.Int32@)">
            <summary>
            Get specified data group from random access file.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="NWG">
            Output: Number of words returned in record array.
            </param>
            <param name="IREF">
            Input: Reference value array.
            </param>
            <param name="NIREF">
            Input: Number of reference values.
            </param>
            <param name="REC">
            Output: Record array.
            </param>
            <param name="NREC">
            Input: Maximum size of record array.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GSEL73(System.Int32@,System.Int32@)">
            <summary>
            Fetch pointer tables for superelement in direct access file.
            </summary>
            <param name="IREF">
            Input: = 0 Use first super element results. &gt; 0 Use next super element results. Output: Hierarcy Reference number.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetBeamElementStress(System.Boolean,System.Int32,System.Int32,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@)">
            <summary>
            Get the stresses in the extreme points for a beam element.
            </summary>
            <param name="bConvertId2Internal">
            True if external element id-numbers are used.
            </param>
            <param name="eElId">
            Element id-number
            </param>
            <param name="loadId">
            Load result case id-number
            </param>
            <param name="sigxxArray">
            Axial stress
            </param>
            <param name="sigbyxArray">
            Bending stress about local y-axis
            </param>
            <param name="sigbzxArray">
            Bending stress about local z-axis
            </param>
            <param name="tauTxArray">
            Torsion stress
            </param>
            <param name="tauxyArray">
            Shear stress in local y-direction
            </param>
            <param name="tauxzArray">
            Shear stress in local z-direction
            </param>
            <param name="vonMisesArray">
            Combined von Mises stress
            </param>
            <returns>
            Error code. Returns 0 if OK
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetBeamSection(System.Boolean,System.Int32@,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get the general beam data
            </summary>
            <param name="bConvertId2Internal">
            True if External element id is used
            </param>
            <param name="eElId">
            Element Id.
            </param>
            <param name="area">
            AREA: Cross section area
            </param>
            <param name="sectModWx">
            WXMIN: Minimum torsional section modulus about shear center (=IX/rmax for a PIPE element)
            </param>
            <param name="sectModWy">
            WYMIN: Minimum sectionmodulus about y-axis = IY/zmax
            </param>
            <param name="sectModWz">
            WZMIN: Minimum sectionmodulus about z axis = IZ/ymax
            </param>
            <param name="staticAreaSy">
            SY Static area moment about y-axis
            </param>
            <param name="staticAreaSz">
            SZ Static area moment about z-axis
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetElementCenterStress(System.Boolean,System.Int32@,System.Int32@,System.Double@,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get the average stresses at the element center for this shell/membrane element
            </summary>
            <param name="bConvertId2Internal">
            True if external element id-numbers are used.
            </param>
            <param name="eElId">
            Element id-number
            </param>
            <param name="loadId">
            Load case id-number
            </param>
            <param name="sigmaX">
            Stress in local x direction. Tension stress is positive.
            </param>
            <param name="sigmaY">
            Stress in local y direction. Tension stress is positive.
            </param>
            <param name="tau">
            Shear stress in local x and y axes.
            </param>
            <param name="vonMises">
            Combined von Mises stress
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetElementCoord(System.Boolean,System.Int32@,System.Int32@,System.Double[]@)">
            <summary>
            Get coordinates of nodes for specified element
            </summary>
            <param name="bConvertId2Internal">
            True if external element id-numbers are used.
            </param>
            <param name="eElId">
            Element id-number
            </param>
            <param name="neNode">
            Number of nodes for this element.
            </param>
            <param name="elementCoordinateArray">
            Array with coordinates of element corners.[0]=X1, [1]=Y1, [2]=Z1, [3]=X2, etc.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetElementMaterial(System.Boolean,System.Int32@,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get the material data for a given shell element.
            </summary>
            <param name="bConvertId2Internal">
            True if external element id-numbers are used.
            </param>
            <param name="eElId">
            Element id-number.
            </param>
            <param name="thickness">
            Plate thickness for this shell/membrane element.
            </param>
            <param name="yield">
            Yield stress for this element
            </param>
            <param name="elasticEModule">
            Elsaticy E-module for this element.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetElementMidpointStress(System.Boolean,System.Int32,System.Int32,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@,System.Double[]@)">
            <summary>
            Get stress components at midpoint of element.
            </summary>
            <param name="bConvertId2Internal">
            True if external element id-numbers are used.
            </param>
            <param name="eElId">
            Element id-number
            </param>
            <param name="loadId">
            Load result case id-number
            </param>
            <param name="sigmaX">
            Tension stress in local x-direction
            </param>
            <param name="sigmaY">
            Tension stress in local y-direction
            </param>
            <param name="tauXy">
            Shear stress in local x- and y-direction
            </param>
            <param name="tauXz">
            Shear stress in local x- and z-direction
            </param>
            <param name="tauYz">
            Shear stress in local y- and z-direction
            </param>
            <param name="vonMises">
            Combined von Mises stress
            </param>
            <param name="sigmaP1">
            Stress component along main primary axes where shear is zero.
            </param>
            <param name="sigmaP2">
            Stress component along other primary axes where shear is zero.
            </param>
            <param name="pTrans">
            Transformation matrix
            </param>
            <returns>
            Error code. Returns 0 if OK
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetElementSize(System.Boolean,System.Int32@,System.Int32@,System.Int32@)">
            <summary>
            Get number of nodes for specified element
            </summary>
            <param name="bConvertId2Internal">
            True if external element id-numbers are used.
            </param>
            <param name="eElId">
            Element id-number.
            </param>
            <param name="elType">
            Element Type.
            </param>
            <param name="neNod">
            Number of nodes for this element.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetExternFromInternElId(System.Int32)">
            <summary>
            Get the external element id-number for a given internal id-number.
            </summary>
            <param name="intElementId">
            Internal element id-number
            </param>
            <returns>
            External element id-number
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetInternFromExternElId(System.Int32)">
            <summary>
            Get the internal element id-number for a given external id-number.
            </summary>
            <param name="extElementId">
            External element id-number
            </param>
            <returns>
            Internal element id-number
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetResultCaseAttributes(System.Int32@,System.Int32@,System.Int32@,System.Int32@,System.Boolean@,System.String@,System.Int32,System.Int32@,System.Int32[]@,System.Double[]@,System.Int32@,System.String[]@,System.Int32)">
            <summary>
            Get attributes for specified result case.
            </summary>
            <param name="iRes">
            IRES: Internal resultcase identifier
            </param>
            <param name="iRun">
            ???
            </param>
            <param name="iLoad">
            ???
            </param>
            <param name="iCompl">
            ???
            </param>
            <param name="lComb">
            ???
            </param>
            <param name="calculationType">
            ???
            </param>
            <param name="calcTypeStringLength">
            ???
            </param>
            <param name="numTyp">
            ???
            </param>
            <param name="idRef">
            ???
            </param>
            <param name="refDat">
            ???
            </param>
            <param name="mTyp">
            MTYP: Maximum number of attribute types.
            </param>
            <param name="attributeType">
            ???
            </param>
            <param name="attrTypeStringLength">
            ???
            </param>
            <returns>
            The get result case attributes.
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetResultCaseCount(System.Int32@,System.Int32@,System.Int32@)">
            <summary>
            Get number of result cases
            </summary>
            <param name="numberOfResults">
            Number of result cases
            </param>
            <param name="mLen">
            MLEN: Maximum length of resultcase text.
            </param>
            <param name="mTyp">
            MTYP: Maximum number of attribute types.
            </param>
            <returns>
            Error number. Returns 0 if OK.
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetResultCaseNames(System.Int32,System.String[]@,System.Int32)">
            <summary>
            Get an array with the name of the result cases.
            </summary>
            <param name="numberOfResults">
            Number of result cases.
            </param>
            <param name="resultCaseNames">
            Array with names of result cases
            </param>
            <param name="stringLength">
            Maximum length of resultcase name
            </param>
            <returns>
            The get result case names.
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetSetBoundary(System.Int32@,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@,System.Double@)">
            <summary>
            Get the geometrical minimum and maximum extend of all elements within a Set.
            </summary>
            <param name="setId">
            Id-number of the Set
            </param>
            <param name="minX">
            Minimum x-coordinate
            </param>
            <param name="minY">
            Minimum y-coordinate
            </param>
            <param name="minZ">
            Minimum z-coordinate
            </param>
            <param name="maxX">
            Maximum x-coordinate
            </param>
            <param name="maxY">
            Maximum y-coordinate
            </param>
            <param name="maxZ">
            Maximum z-coordinate
            </param>
            <returns>
            Error number. Returns 0 if OK.
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetSetCount(System.Int32@,System.Int32@)">
            <summary>
            Get number of sets and max length of their name.
            </summary>
            <param name="numberOfSets">
            Number of Sets
            </param>
            <param name="stringLengthOut">
            Length of Set names
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetSetElements(System.Boolean,System.Int32@,System.Int32@,System.Int32[]@)">
            <summary>
            Get an array with Id-numbers of all elements within a Set.
            </summary>
            <param name="bElementIdOutIsInternal">
            Specify if internal or external element numbers should be used
            </param>
            <param name="setId">
            Id of Set.
            </param>
            <param name="nEl">
            Number of elements in the Set
            </param>
            <param name="elementIdArray">
            Array with element Id-numbers
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetSetNames(System.Int32,System.Int32[]@,System.String[]@,System.Int32)">
            <summary>
            Get an array of all Set-names defined in current superelement.
            </summary>
            <param name="numberOfSets">
            Number of element Sets
            </param>
            <param name="setIdArray">
            Array with Set ids
            </param>
            <param name="setNameArray">
            Array with Set names
            </param>
            <param name="stringLength">
            Length of Set names
            </param>
            <returns>
            The get set names.
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.GetSetSize(System.Int32@,System.Int32@)">
            <summary>
            Get the number of elements within a Set.
            </summary>
            <param name="setId">
            Id of Set.
            </param>
            <param name="nEl">
            Number of elements in the Set
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.MRES73(System.Int32@,System.Int32@)">
            <summary>
            Move result data from input result file to output result file.
            </summary>
            <param name="IOP">
            Input: Option code = 0 All data types. = 1 First level data types. = 2 Higher level data types. Less than 10 Replace previous data groups. Greater than 10 Append data groups.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.OPEN73(System.Int32@,System.String,System.String,System.String,System.String@)">
            <summary>
            Open a Sesam direct access interface file.
            </summary>
            <param name="IMD">
            Input: MD-File to be opened.
            </param>
            <param name="PREFIX">
            Input: File prefix.
            </param>
            <param name="FILNAM">
            Input: File name.
            </param>
            <param name="EXT">
            Input: File extension.
            </param>
            <param name="STATUS">
            Input: = 'NEW' - Open a new file. = 'OLD' - Open an old file. = 'SCRATCH' - Open a new file as scratch. = 'READ' - Open an old file for reading. Output: = 'ERROR' - Error when opening file. = 'EMPTY' - If data file is empty. = 'RESULTS' : If results are found.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.OPENSQ(System.Int32@,System.String,System.String,System.String,System.String,System.String,System.Int32@)">
            <summary>
            Open sequential files.
            </summary>
            <param name="IUNIT">
            Input: Fortran unit number.
            </param>
            <param name="FILPRE">
            Input: File name prefix.
            </param>
            <param name="FILNAM">
            Input: File name.
            </param>
            <param name="FILTYP">
            Input: File type. Extension code.
            </param>
            <param name="STATUS">
            Input: File status. = 'OLD', = 'APPEND' (Implies 'OLD'), = 'NEW', = 'READ' (Implies 'OLD'), = 'PRINT' (Implies 'NEW'), = 'SCRATCH', = 'UNKNOWN'.
            </param>
            <param name="FORM">
            Input: Formatting. = 'FORMATTED', = 'FORMATTED=xxxx', = 'UNFORMATTED=xxxx', = 'IEEE-UNFORMATTED'.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.PREM73(System.String,System.Int32@,System.Int32[],System.Int32@,System.Int32@,System.Double[],System.Int32@,System.Int32@)">
            <summary>
            Put specified part of data group record. Put remaining part of data group record.
            On addressable file this routine may update an existing record in part or entirely.
            This routine is used together with PRES73 when writing a record  that is larger than the available record array in the application.
            Then PRES73 is used first to create the Record with size NWG on file, and store the first part of data NREC. NWG is larger then NREC.
            Thereafter PREM73 may be used several times to fill in additional data.
            If this routine is used to rewrite a record from the start, then take care NOT to change the Record size, or Reference values in the beginning of the record.
            This routine may return positive status values in normal operation, the calling routine should check that the expected value is actually returned.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="NWG">
            Input: Number of words.
            </param>
            <param name="IREF">
            Input: Reference value array.
            </param>
            <param name="NREF">
            Input: Number of reference values.
            </param>
            <param name="IPREC">
            Input: Pointer within record.
            </param>
            <param name="REC">
            Input: Record array.
            </param>
            <param name="NREC">
            Input: Number of words to store.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.PRES73(System.String,System.Int32@,System.Double[],System.Int32@,System.Int32@)">
            <summary>
            Put data group record into file.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="NWG">
            Input: Number of words.
            </param>
            <param name="REC">
            Input: Record array.
            </param>
            <param name="NREC">
            Input: Maximum size of record array. Output: Actual size of record array.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.PSEL73(System.Int32@,System.Int32@)">
            <summary>
            Save pointer tables for superelement in direct access file.
            </summary>
            <param name="IREF">
            Input: Reference value for later retrieval of this super element.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.PTAB73(System.String,System.Int32[],System.Int32@,System.Int32@)">
            <summary>
            Establish pointer table for data group type.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="ITAB">
            Input: Array containing dimensions. If set to less than 0 - then the dimensions of pointer table are not known and a scratch pointer table in CD-array is established.
            </param>
            <param name="NTAB">
            Input: Type and Dimensions of pointer table.Integer. Consult the SIFTool manual for complete specification.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.PTXT73(System.String,System.Int32[],System.Int32@,System.String,System.Collections.Generic.List{System.String},System.Int32@)">
            <summary>
            Put text data record into file.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="IREF">
            Reference value array.
            </param>
            <param name="NIREF">
            Number of reference values.
            </param>
            <param name="TNAME">
            Entity name.
            </param>
            <param name="TEXT">
            Entity description text.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.RSEL73(System.Int32@)">
            <summary>
            Release pointer table header for current superelement. That, is release memory held by the pointer tables.
            </summary>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.SFIR73(System.String,System.Int32@,System.Int32@)">
            <summary>
            Set first record for sequential access on direct access file.
            </summary>
            <param name="IDGR">
            Input: Data group type.
            </param>
            <param name="ILOP">
            Loop sequence on Two-dimensional tables. = 1 IREF1 is the outer loop. = 2 IREF2 is the outer loop. = 0 No change of direction.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.SIFGLS(System.Int32@,System.String,System.Int32@,System.Int32[],System.Int32@,System.Int32@)">
            <summary>
            Get list of superelement hierarchy references.
            </summary>
            <param name="IHTOP">
            Input: Hierarchy reference of superelement. The list will only contain superelements that are descendants of IHTOP.
            </param>
            <param name="OPTION">
            Input: Specifies which superelements to get.
            </param>
            <param name="MIHREF">
            Input: Declared length of IHREF.
            </param>
            <param name="IHREF">
            Output: List of superelement hierarchy references.
            </param>
            <param name="NIHREF">
            Output: Number of references returned in IHREF.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.SIFLST(System.Int32@,System.Int32[],System.Int32@)">
            <summary>
            Print tabulated list of super elements from Sesam interface file.
            </summary>
            <param name="IUNIT">
            Input: FORTRAN unit where list shall be printed. If IUNIT is negative, Messag is used.
            </param>
            <param name="ISHREF">
            Input: List of hierachy references.
            </param>
            <param name="NSEL">
            Input: Number of super elements.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.SIFTOL(System.Int32@,System.Int32@,System.Int32@,System.Int32[],System.Int32@,System.Int32[],System.Int32@)">
            <summary>
            Initialize the SIFTool module.
            </summary>
            <param name="LUMES">
            Input: FORTRAN write unit for SIFTOOL messages.
            </param>
            <param name="LUNOR">
            Input: FORTRAN write unit for NORSAM/DHS opening information LUNOR may be same unit as LUMES. If LUNOR=-1, NORSAM/DHS opening information is not printed.
            </param>
            <param name="NCD">
            Input: Number of NORSAM/DHS CD-Arrays to open. NCD must be in range [10,99]. Most applications can use NCD = 10.
            </param>
            <param name="IUCD">
            Input: Array of CD-file units (2 FORTRAN file unit numbers). These file units are used by the internal I/O system, and must not be in conflict with other file units used by the application program.
            </param>
            <param name="NMD">
            Input: Max Number of SESAM direct-access result files (and possibly additional NORSAM/DHS MD-files) to be opened later by OPEN73. NMD must be in range [1,99]
            </param>
            <param name="IUMD">
            Input: Array of MD-file unit numbers (NMD FORTRAN file unit numbers). These file units are used by the internal I/O system, and must not be in conflict with other file units used by the application program.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.SRES73(System.Int32@,System.String,System.Int32@,System.String,System.Int32@,System.Int32@)">
            <summary>
            Set result data base files. When calling this routine you tell SIFTOOL how subsequent calls to put and get operations are to be handled.
            </summary>
            <param name="IFIL">
            Input: File number for input operations. = Fortran unit number for formatted or unformatted sequential fortran file. = MD-file number for Norsam word addressable file. Less than 0 then file has been closed.
            </param>
            <param name="IFORM">
            Input: Format and organization of IFIL. = 'FORMATTED' formatted fortran file. = 'UNFORMATTED' unformatted fortran file. = 'NORSAM' Word addressable Norsam file. = 'DEFAULT' No change specified. = 'CURRENT' Get current setting of IFIL.
            </param>
            <param name="OFIL">
            Input: File number for output operations. = Fortran unit number for formatted or unformatted sequential fortran file. = MD-file number for Norsam word addressable file. Less than 0 then file has been closed.
            </param>
            <param name="OFORM">
            Input: Format and organization of OFIL. = 'FORMATTED' formatted fortran file. = 'UNFORMATTED' unformatted fortran file. = 'NORSAM' Word addressable Norsam file. = 'DEFAULT' No change specified. = 'CURRENT' Get current setting of OFIL.
            </param>
            <param name="IPRSW">
            Input: Print switch for result file routines. = 0 No print. = 1 Print of warning messages. Greater than 1 Print of debugging information.
            </param>
            <param name="ISTAT">
            Output: Status flag. For codes consult the SIFTool manual.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.SiftoolRead(System.String,System.Int32@)">
            <summary>
            Open Sesam file for reading of data for given superelement.
            </summary>
            <param name="fileNameIn">
            Full path and file name of .FEM, .SIU, .SIF or .SIN file.
            </param>
            <param name="superElementNoIn">
            Superelement number.
            </param>
            <returns>
            Error number. 0 if success.
            </returns>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.VTCPUN(System.Int32@)">
            <summary>
            Gets the CPU identification.
            </summary>
            <param name="icpun">CPU identification</param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SIFTool.VTPRMS(System.String,System.String,System.String)">
            <summary>
            To keep SESAM configuration system parameters. If a parameter exists it is replaced
            </summary>
            <param name="CFUNC">
            Input: Consult.
            </param>
            <param name="CKEY">
            Input: Consult.
            </param>
            <param name="CVALUE">
            Input: Consult.
            </param>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.SifToolConstants">
            <summary>
            Constants for usage of SIFTool.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.SupelRef">
            <summary>
            The default super element reference.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.Ncd">
            <summary>
            Number of CD arrays.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.Input">
            <summary>
            Fortran standard input unit.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.Output">
            <summary>
            Fortran standard output unit.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.Imd01">
            <summary>
            MD file number 1.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.ExtFem">
            <summary>
            FEM file extensiion.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.ExtSin">
            <summary>
            SIN file extension.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.Old">
            <summary>
            Signal an existing sif-file.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.Read">
            <summary>
            File access code read only.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.New">
            <summary>
            Open new sin file.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.Format">
            <summary>
            Signal a sif formatted file.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.BinFormat">
            <summary>
            Signal a sin norsam binary file.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.SinResults">
            <summary>
            Signals a sin binary file that contains results.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.SinEmpty">
            <summary>
            Signals an empty sin binary file.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolConstants.InitialRecordLength">
            <summary>
            Intial length for the Administrative Data Record.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.SifToolStartUp">
            <summary>
            The sif tool start up.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolStartUp.FemFileUnitNumber">
            <summary>
            The _ fem file unit number.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolStartUp.Ncd">
            <summary>
            The _ncd.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolStartUp.NumberOfSifDataBasesToOpen">
            <summary>
            The _ number of sif data bases to open.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolStartUp.Output">
            <summary>
            The _output.
            </summary>
        </member>
        <member name="F:DNVS.Sesam.Commons.SifTool.SifToolStartUp.callCounter">
            <summary>
            The _call counter.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.CloseExistingSifToolDataBase">
            <summary>
            Close the SifTool data base opened with OpenExistingSifToolDataBase(string sinFileName).
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.ConvertSif2Sin(System.String,System.String@)">
            <summary>
            Converts a standard SIF file to a SIN data base. It saves the pointer tables using super element ref = 1.
            </summary>
            <param name="sifPathAndFileName">
            SIF path and file name.
            </param>
            <param name="sinPathAndFileName">
            SIN path and file name.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.ConvertSin2Sif(System.String,System.String,System.Int32)">
            <summary>
            Converts a standard SIN data base to a SIF file. The top level data is sent current to ensure that all data are copied to SIF file.
            </summary>
            <param name="sifPathAndFileName">
            SIF path and file name.
            </param>
            <param name="sinPathAndFileName">
            SIN path and file name. If given then the corresponding data base is opened.
            </param>
            <param name="iref">
            Super element number SELTYP.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.CreateInitConstants(System.Int32[]@,System.Int32@,System.Int32[]@)">
            <summary>
            The create init constants.
            </summary>
            <param name="iucd">
            The iucd.
            </param>
            <param name="nmd">
            The nmd.
            </param>
            <param name="iumd">
            The iumd.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.InitializeSiftool">
            <summary>
            The initialize siftool.
            </summary>
            <exception cref="T:System.ApplicationException">
            Throws an application exception if SIFTool cannot be initialised.
            </exception>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.OpenExistingFormattedSifFile(System.String)">
            <summary>
            Opens an existing sif-file.
            </summary>
            <param name="sifPathAndFileName">
            The path and name to the existing sif-file.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.OpenExistingSifToolDataBase(System.String)">
            <summary>
            Opens existing SifTool data base. The data base is opened as read only.
            </summary>
            <param name="sinPathAndFileName">
            The path and file name.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.OpenNewFormattedSifFile(System.String)">
            <summary>
            Opens a new formatted sif file.
            </summary>
            <param name="sifPathAndFileName">
            The name of the sif file.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.OpenNewSifToolDataBase(System.String)">
            <summary>
            Opens new and empty SifTool data base. Notice that the directory is created if not present.
            </summary>
            <param name="sinPathAndFileName">
            The path and file name.
            </param>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.TransferFromSif2Sin">
            <summary>
            Calls MRES73 and so does the transfer from the SIF file to the SIN database.
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.SifToolStartUp.GetPathNameAndExtension(System.String,System.String@,System.String@)">
            <summary>
            Gets the file extension and file name from a string containing the file name and extension.
            </summary>
            <param name="pathAndFileName">
            The path and file name and extension.
            </param>
            <param name="pathAndName">
            The path and file name without extension.
            </param>
            <param name="extension">
            The file extension.
            </param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.SifToolStartUp.FemFileUnit">
            <summary>
            Gets FEMFileUnit.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.SifToolStartUp.OutPutFilePathAndName">
            <summary>
            Gets or sets OutPutFilePathAndName.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.SifToolStartUp.SuppressLicenceCheck">
            <summary>
            Gets or sets SuppressLicenceCheck. The licence check is suppressed
            if the string is set to have the value "SuppressLicenceCheck".
            </summary>
        </member>
        <member name="M:DNVS.Sesam.Commons.SifTool.WindMergeTool.#ctor(System.String,System.String,System.String,System.String)">
            <summary>
            Create a WindMergeTool instance.
            </summary>
            <param name="inputFemFileName">Name of the input FEM file.</param>
            <param name="inputFemFilePath">Location for the input FEM file.</param>
            <param name="outputFemFileName">Name of the output FEM file.</param>
            <param name="outputFemFilePath">Location for the output FEM file.</param>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.WindMergeTool.InputFemFileName">
            <summary>
            Name of the input FEM file.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.WindMergeTool.InputFemFilePath">
            <summary>
            Location for the input FEM file.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.WindMergeTool.OutputFemFileName">
            <summary>
            Name of the output FEM file.
            </summary>
        </member>
        <member name="P:DNVS.Sesam.Commons.SifTool.WindMergeTool.OutputFemFilePath">
            <summary>
            Location for the output FEM file.
            </summary>
        </member>
        <member name="T:DNVS.Sesam.Commons.SifTool.MultiMap`1">
            <summary>
            A simple multimap.
            </summary>
            <typeparam name="TV">The type to hold the values.</typeparam>
        </member>
    </members>
</doc>
